REED KEW6310-01 500A Power Quality Analyzer

Price:

130.000.000,-

Quantity Order:

The new Reed KEW6310-01 Power Quality Analyzer provides an advanced and low cost solution to solving difficult power quality issues. The advanced measurement engine and long recording times ensure that you will locate the most difficult problems with ease. And because time is money you will accomplish much more in less time.

Features
Measurements include: voltage, current, frequency, active power, apparent power, reactive power, active energy, reactive energy, active energy, power factor, power quality, i.e. sags and swells, unbalanced, flicker and transients, and harmonics.
Applicable to five wiring systems:
single phase 2-wire x 4 single phase 3-wire, three phase 3-wire x 2 three phase 4-wire, and Scott wiring.
Waveform and vector display.
True RMS value can be displayed.
Large color LCD screen.
Recording interval can be set between 1 second and 1 hour.
Internal non-volatile memory of 1MB.
Storage data up to 1GB with compact flash card.
Download data to PC through USB connection.
Dual power supply: AC line voltage or battery operation.
Conforms to EN 61010-1 CAT III 600V safety standard.

Specifications:
AC Voltage Range: 150.0V, 300.0V, 600.0V, 1000V
AC Voltage Accuracy: ± 0.2% of reading ± 0.1% of full scale
AC Current Range: 500.0 Amps
AC Current Accuracy: ± 0.2% of reading ± 0.1% of full scale + clamp accuracy
Active Power Accuracy: ± 0.5% of reading ± 0.1% of full scale + clamp accuracy
Frequency Range: 40Hz to 70Hz
Effect of Power Factor: ± 1% of reading, cos Ø = ± 0.5 ( Power Factor = 1)
Recording Intervals: Seconds: 1, 2, 5, 10, 15, 20, 30; Minutes: 1, 2, 5, 10, 15, 20, 30, 60

KEW8125 Clamp Sensor Specifications
Conductor size: ¦ 40
Rated current: AC 500A
Output voltage: AC 500mV/ 500A ( AC 1mV/ A)
Accuracy: ± 0.5% rdg ± 0.1mV ( 50/ 60Hz) , ± 1.0% rdg ± 0.2mV ( 40Hz~ 1kHz)
Phase Shift: within ± 1.0° ( 45~ 65Hz)
Withstand voltage: AC 5350V for 5 seconds
Cable length: Approx. 3m
Output connector: MINI DIN 6pin
Output impedance: Approx. 2©
Applicable standards: IEC 61010-1: 2001, IEC 61010-2-032: 2002, CAT.III 600V pollution degree 2
Dimensions: 128( L) x 81( W) x 36( D) mm
Weight: Approx. 260g
Included: 9095 ( Portable case) , Instruction manual, Cable marker

General Specifications
Display: 3.5 inch color LCD ( 320 x 240 dot matrix)
AC Power Supply: 100 to 240V AC ( 50/ 60Hz)
DC Battery Power: 6 x LR6 batteries
Dimensions: 206mm ( H) x 184mm ( W) x 65mm ( D)
Weight: 800g including batteries

Recommend to your friends