Specification
KEY STRENGTHS:
Whether you’re a professional or an amateur DIY-er or craftsman, unleveled edges and badly measured angles are a real no-no. Take the guesswork out of measuring, marking and reading angles—no tricky geometry or complicated calculations required—with our Digital Angle Fider/Protractor. It reads up to 360°, has a high resolution of 0.05° and it can instantly measure absolute and relative angles within a 225° range making it invaluable for layout work, machine set-up (table-saw blades, jointer fences, etc.), and trim installation.
While the accuracy of the electronic sensor is ±0.1°, because it is mounted in another assembly, based on testing, we are more comfortable stating the overall accuracy as better than ±0.1° per 45° of blade rotation. This translates as better than ±0.02" over the 10" length of the blade per 45° rotation. It is very easy to operate & use, just simply swing open the tool’s pivoting leg and immediately read the angle on the digital display window.
The tool over all is quite durable and even it endured a few knocks and a bit of rough treatment will still measure accurately within its specified accuracy range. Its flat, straight edges are perfect for marking accurate lines with a marker or pencil, or even for running the edge of your circular saw against to make an accurate mitered cut. Our Digital Angle Finder/Protractor ensures high level of accuracy you require to deliver a good result.
Say goodbye to unprofessional handiwork with this smart, digital angle finder with moving blade, which measures a full 360° and has built-in spirit level that comes in handy.
Buy Now!
Features:
* High resolution of 0.05° and easily transfers miter angles with no calculations necessary; computes angles accurately to ±1°
* Measure up to 360° when not using the locking knob
* With adjustable pivot leg provides up to 225° range of movement, measures 2mm thick, fairly strong and rigid
* High accuracy bubble/spirit level for measuring horizontal level easily
* With analog quadrant display to allow easier deciphering of angle position
* Rated as waterproof to IP54 standard
* Absolute measurement (records the original zero position after power off)
* Simple recalibration procedure to restore factory accuracy
* Reverse face: Display always reads in upright, no matter which way it is turned.
* Conversion between absolute measurement and relative measurement
* Absolute and relative measurement display with a single push of a button
* Easy calibration and Zero setting
* With HOLD function, value retain on the LCD screen even if the measuring arm is being move
* With innovative large LCD readable display shows the exact angle at once great for eliminating eye strain and display reads to one tenth of a degree
* Low power consumption
* Smart & lightweight aluminum casing
* Aluminum blade and box body ensures rust-resistant and durable and with a box shape main measure reference base (for extra strength) and rigidity
* Made out of strong durable material for use on even the most demanding job sites
* With small plastic hook for storage of the tool, or to hang from your tool belt with an appropriate secondary hook or clip
* With thumbscrew to lock the stainless-steel blade and lock the moving blade at any position or angle
Essential for a wide range of applications:
* Best tool for table saw, miter saw and power hand saw to cut the wood at all angles, making the work more safe and convenient
* Ensure the accuracy of cutting equipment and other tools
* Create straight edges when assembling furniture
* Create perfectly fitting mitered wood joints
* Guarantee correctly built wood and metalwork projects
* Make sure wallpaper and cornices are level when decorating
* Mark and cut paving and decorating tiles to fit awkward shapes
* Easy to measure all kinds of angles, drawing lines, accessory of power tools, checking existing angles and transfer these to other pieces for cutting
* Useful for measuring, marking, and setting angles and can be used in the same way on a jointer or drill press as well
Specifications:
* Waterproof: IP54
* Measuring Range: 0° - 360°
* Resolution: 0.05°
* Accuracy: ±0.1°
* Leg Extension Length: 200mm
* LCD Display: 120mm character height
* Automatic Shutoff: 5 Minutes
* Working Current:
Go to Member Menu