Specification :

SPESIFICATION:
Model 8430
Per phase:
Output Current Power Max V
4 Amperes 200 VA 50.0 Vrms
7.5 Amperes 200 VA 26.7 Vrms
15 Amperes 200 VA 13.4 Vrms
30 Amperes 200 VA 6.67 Vrms
DC 200 Watts
With two currents in parallel:
Output Current Power Max V
8 Amperes 400 VA 50.0 Vrms
15Amperes 400 VA 26.7 Vrms
30 Amperes 400 VA 13.4 Vrms
60 Amperes 400 VA 6.67 Vrms
With three currents in parallel:
Output Current Power Max V
12 Amperes 600 VA 50.0 Vrms
22.5Amperes 600 VA 26.7 Vrms
45 Amperes 600 VA 13.4 Vrms
90 Amperes 600 VA 6.67 Vrms
With four currents in parallel:
Output Current Power Max V
16 Amperes 800 VA 50.0 Vrms
30 Amperes 800 VA 26.7 Vrms
60 Amperes 800 VA 13.4 Vrms
120 Amperes 800 VA 6.67 Vrms
n Universal input voltage - Operating from 90 to 264
Vac, 50/ 60 Hz, the MPRT can use virtually any standard
source in the world.
n Battery simulator - MPRT’ s battery simulator provides
dc output voltages of 24, 48, 125 and 250 Volts.
Eliminates needing a separate dc source for providing
logic voltage for microprocessor-based relays.
n Immediate error indication - Audible and visual
alarms indicate when amplitude or waveforms of the
outputs are in error.
n Modular design - Output modules plug-in and slide
out easily for system re-configuration and maintenance.
n Ancillary Interface - Provides interface to other MPRT
units.
n MPRT Model 8430 - Provides up to 300 Volts rms. at
150 VA and 30 Amps rms. at 200 VA per phase. Ample
voltage for testing high instantaneous overvoltage relays.
The current amplifier has high compliance voltage at
low currents for testing ground overcurrent relays. When
configured with four channels, the current amplifiers can
be paralleled to provide a maximum of 120 Amperes at
800 VA, for testing instantaneous overcurrent relays.
With high VA output ratings, the unit can be used for
testing a panel of relays.