Specification :

SE-9000, For elevator maintenance, 2ch display
Basic Features
* Suitable for elevator speed of high building
* 2 independent display
* Analog output terminal to record measuring data
* 2 external hold terminals for remote control
* Remote control by external encoder
* Easy to read LED display
* Auto power off
* Low battery power alarm
Optional Accessories
No accessories available
Specifications
Measuring Range: 0 ~ 1999.9m/ min
4digit red LED display ( 2ch) ( max.999.9) ( LED at upper left in the display will blink went the measured value exceeds 999.9m/ min
measuring time : 0.2sec( sampling time)
accurancy : + / -2dgt
analog output :
DC0-1999.9mV( at 0m/ min~ 1999.9m/ mim)
analog output accurancy: + -( 0.5% + -1mV)
Data hold : cH1, cH2 isolated
operation by main switch or external hold switch
auto power off : after 3 minutes of no operation except for during measurment
Battery : R6PX4( with battery alarm)
Size/ weight: 170/ 50/ 50mm/ approx 480g
Standard Accesories Included : speed ring thickness 10mm( SE-10) X1
speed ring thickness 0.9mm( SE-0.9) X1
cord for hold input ( SE- L- H) X2
cord for analog output ( SE- L- O) X1
hex wrench X1, Carrying case( C- SE) X1, external encoder( Speed Ring) X1, ( SE-9000M only)
instruction manual.