What advantages compare with standalone DVR ?
1.Tel-line Port Connection / PSTN Function
when wireless PIR motion detector had been triggered.
it will be send out the wireless alarm signal to Alarm DVR.
and then ! Alarm DVR will Auto-Dial pre-recorded telephone
or mobile phone numbers with voice message via Tel-Line IPSTN) output port
2.Supports 24 or 56 channels Wireless Alarm Signal inputs via external Wireless Antenna
3.built• in rechargeable Battery to supply Cameras and DVR power Consumption together
4.built-in Siren or connect external Wired or Wireless Siren
when wireless PIR motion detector had been triggered,
it will be send out the wireless alarm signal to ! Alarm DVR.
and then ' Alarm DVR will make the Alarm by itself via built-in siren
or wired siren which had been connected.
5.Camera and Detector Linkage/ SNAP Picture
when wireless PIR motion detector had boon triggered,
it will be send out the wireless alarm signal to ' Alarm DVR,
and then ' Alarm DVR will notify the corresponding camera SNAP the picture by email notification or start the video recording on HOD.
6.2 VGA Outputs
PC monitor & normal monitor switching display via wireless intelligent
remote controller 2 VGA outputs easy to monitoring
7.3G modem/ Alarm SMS message
when wireless PIR motion detector had been triggered,
It will be send out the wireless signal to ' Alarm DVR,
and then ' Alarm DVR will send out the SMS message
to 3G Mobile Phone which had been connected 3G Modem on USB port of DVR,
its the dual way control between 3G Mobile Phone and ! Alarm DVR,
like: arm, disarm, check P. current alarm checking operation etc