Specification :

1.professional audio, pro sound, line array speaker
2.3-way, full range passive line array system
3.Birch plywood, Water-proof
DESCRIPTION and APPLICATION
W-6 is a line array system which is made of two 12' ' neodymium woofers, two 6.5' ' neodymium midrange speaker units, two 2.5' ' itanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy.It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-6 is a 3-way, full range system and may be used without subwoofers for many applications. It may also be complemented by ground stacked subwoofers CVR S-218/ CV-218B, which brings superb line array performance to large stadiums, big outdoor concerts and commercial events

Model W-6

Type Line array system
Frequency Response 45Hz-20KHz± 3dB
Directivity index( Dl) 12( ± 2) 1.2KHz-16KHz
Power handing LF 800W( RMS) 1600W( PEAK)
MF 300W( RMS) 600W( PEAK)

HF 180W( RMS) 360W( PEAK)
Sensitivity LF 101dB( 1W1M)
MF 104dB( 1W1M)
HF 111dB( 1W1M)
MaxS.P.L LF 130dB( PEAK/ 1M)
MF 129dB( PEAK/ 1M)
HF 134dB( PEAK/ 1M)
LF section 2× 12" ( 310mm) neodymium woofer
75mm( 3in) coil
Nominal impedance 16 ohm
MF section 2× 6.5' ' ( 170mm) neodymium MF
50mm( 2in) coil
Nominal impedance 16 ohm
HF section 2× 2.5" neodymium compression driver
with 65mm titanium diaphragm
Nominal impedance 16 ohm
Output section 3-channel
Dispersion pattern 110° H× 7.5° V
Finish Water-proof, wear-resistant textured black paint
Array design Arrays of less than 3× W-6 will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1( + ) 1( -) MF 2( + ) 2( -) HF 3( + ) 3( -)
Rigging system Please refer to the W-6 user
manual before any operation
Input connectors 2× Neutrik Nl8
Recommend crossover LF 45Hz-400Hz
MF 400Hz-1200Hz
HF 1200Hz-20KHz
Dimensions 1060× 380× 620mm( W× H× D)
Package dimensions 1145× 455× 690mm/ 0.36cbm
Enclosure Birch plywood
Net weight 62kg
Gross weight 66kg