Specification :

1.line array speaker
2.Birch plywood, Water-proof
3.CE, ROHS certifica
4.neodymium-magnet , reliable
5.good after sale service
DESCRIPTION and APPLICATION
W-210A is a line array speaker which is made of two 10' ' neodymium woofers, two 2' ' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
DESCRIPTION and APPLICATION
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15� neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion
Model W-210A/ W-250A

Type Line array system
Line array sub-bass system( W-250A)

Frequency Response 55Hz-20KHz± 3dB
40Hz-150Hz± 3dB( W-250A)
Directivity index( Dl) 12( ± 2) 1.2KHz-16KHz
Power handing LF 500W( RMS) 1000W( PEAK)
HF 160W( RMS) 320W( PEAK)

1200W( RMS) 2400W( PEAK) ( W-250A)
Sensitivity LF 99dB( 1W@ 1M)
HF 108dB( 1W@ 1M)
112dB( 1W@ 1M) ( W-250A)
MaxS.P.L LF 127dB( PEAK/ 1M)
HF 127dB( PEAK/ 1M)
143dB( PEAK/ 1M) ( W-250A)
LF section 2× 10" ( 260mm) neodymium woofer
75mm( 3in) coil
Components 2× 15" ( 380mm) neodymium woofers
100mm( 4in) coil( W-250A)
Nominal impedance 16 ohm
4 ohm( W-250A)
HF section 2× 2" neodymium compression driver
with 51mm titanium diaphragm
Nominal impedance 16 ohm
Output section 2-channel
Dispersion pattern 110° H× 9° V
Finish Water-proof, wear-resistant textured black paint
Array design Arrays of less than 3× W-210A will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1( + ) 1( -) HF 2( + ) 2( -)
1( + ) 1( -) ( W-250A)
Rigging system Please refer to the W-210A user
manual before any operation
Input connectors 2× NL4MP speakon
Recommend crossover LF 45Hz-1200Hz
HF 1200Hz-20KHz
35Hz-120Hz( W-250A)
Dimensions 855× 293× 600mm( W× H× D)
855× 610× 820mm( W× H× D) ( W-250A)
Package dimensions 925× 360× 670mm/ 0.22cbm
925× 680× 890mm/ 0.56cbm( W-250A)
Enclosure Birch plywood
Net weight 42kg ( W-210A) / 81kg ( W-250A)
Gross weight 45kg ( W-210A) / 84kg ( W-250A)