Specification :

1.Line array speaker with all neodymium driver
2.3-way line array speaker system
3.good after-sale service
4.clear sound
DESCRIPTION and APPLICATION
W-312A is a line array speaker which is made of one 12' ' neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5' ' neodymium midrange speaker units of well-designed of waves phase horn loading technique, two 3' ' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without subwoofers in many applications.It may also be complemented by ground stacked subwoofers CVR S-218/ CV-218B
Model W-312A

Type Line array system
Frequency Response 45Hz-20KHz± 3dB
Directivity index( Dl) 12( ± 2) 1.2KHz-16KHz
Power handing LF 500W( RMS) 1000W( PEAK)
MF 300W( RMS) 600W( PEAK)

HF 200W( RMS) 400W( PEAK)
Sensitivity LF 104dB( 1W1M)
MF 107dB( 1W1M)
HF 111dB( 1W1M)
MaxS.P.L LF 131dB( PEAK/ 1M)
MF 132dB( PEAK/ 1M)
HF 134dB( PEAK/ 1M)
LF section 1× 12 ( 310mm) neodymium woofer
75mm( 3in) coil
Nominal impedance 8 ohm
MF section 2× 6.5' ' ( 170mm) neodymium MF
50mm( 2in) coil
Nominal impedance 16 ohm
HF section 2× 3" neodymium compression driver
with 72mm titanium diaphragm
Nominal impedance 16 ohm
Output section 3-channel
Dispersion pattern 110° H× 7° V
Finish Water-proof, wear-resistant textured black paint
Array design Arrays of less than 3× W-312A will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1( + ) 1( -) MF 2( + ) 2( -) HF 3( + ) 3( -)
Rigging system Please refer to the W-312A user
manual before any operation
Input connectors 2× Neutrik Nl8
Recommend crossover LF 45Hz-400Hz
MF 400Hz-1800Hz
HF 1800Hz-20KHz
Dimensions 1116× 395× 530mm( W× H× D)
Package dimensions 1190× 470× 600mm/ 0.34cbm
Enclosure Birch plywood
Net weight 62kg
Gross weight 66kg