Specification :

DESCRIPTION

FLOW CAPTOR P-R-O 50

- Automatic scaling and set-point

- No moving parts

- Learn function for flow rate

- Push-button re-scaling if needed

- Easy to install

The new captor P-R-O 50 is for applications requiring RELATIVE measurement and set-point of flow rate. This means that the actual velocity of the flow or the quantitative measurement in GPM is not known and is not important. What is important is that the set-point can be set as a “ percentage of� or “ relative to� the full flow rate. No other flow sensor could do it this simply or effectively.

Operation
Simply install the captor into a 1/ 2 NPT female fitting or T fitting. Apply power and turn on your flow. Press the “ set� button until all 7 LED’ s flash. The flow-captor automatically stores this flow rate and causes all 7 of the range LED’ s to remain lit, indicating 100% of full flow rate. The captor then automatically sets the set-point ( shown by the appropriate LED “ flashing� ) at 50% of the full flow rate. The flow OK light will also be lit showing that the established full flow rate is what is flowing in the pipe. It is just that simple, your “ relative� monitoring captor is now ensuring that whatever your normal flow rate is, if it reduces by 50% you will get an alarm from the captor.