Welcome to
CV. GALUNG PRIMA
Free Member
CV. GALUNG PRIMA
Indonesia
Indonesia
KITO Armaturen GmbH -....
-
- DESCRIPTION
The flame arresters have then been further developed in accordance with the requirements of the latest regulations and standards.
The elements consists of two stainless steel (or better) strips of 0,2 or 0.15 mm of thickness; the width varies depending upon the duty. In each case a smooth and a corrugated strip are wound tightly together, forming a circular element. This forms a gap between the smooth and corrugated strip with a triangular section. The width of the gap is determined by the height of the corrugation. The gap width used in a specific flame arrester is related to the MESG of the gas mixture, but not equal to it.
Special widths for gas/air or vapour mixtures with abnormal flashback characteristics can be determined with the co-operation of test-institutes like PTB, BAM or IBExU, and manufactured by ourselves. The flame arrester may also be CE marked during this verification procedure.
KITO Armaturen GmbH Products :
- KITO Relief Hoods :
Hooded Tank
- KITO Pressure Relief Valves
- KITO Vacuum Relief Valves
- KITO Combined Pressure / Vacuum Valves
- KITO In-line Valves
- KITO Flame Arrester, Detonation Proof
- KITO Flame Arrester, Explosion Proof
- KITO Tank equipment
- KITO-Special armatures
Armatures made from plastic or coated
- KITO-Equipment for Armatures
Heating covers, proximity switches, thermocouple e.g.
and clickshowing 1-2 of 2
