Specification :

Feature
1. Adopt DSP microprocessor of TI company in America and IPM intellegent module.
2. Space voltage vector SAPWM control, few harmonic output, low noise.
3. Effect is very good of stop of DC braking capacity from 0% -100%
4. Four kinds time of acceleration/ decelaration which can setting arbitrarily of time 0.1 second to 999.9 seconds.
5. Six multi-functional terminals which can setting arbitrarity of 24 kinds of purpose
6. PLC running which can setting of 16' stage running frequency and time.
7. Built-in PID and funciton of speed setting on pulse coder.
8. RS485 communication control adopt the popular MODBUS communication protector.
9. Appearance size with subminiature + keypad design with simple.

Specification:
Phase no.: Single-phase
Input voltage: AC110V or 200V or 220V or 240V
Output voltage: AC110V & 220V
With fuse protector or with over current protector.

Application:
All the Electronic Equipments.

Remarks:
Custom-made specifications are acceptable.
Input voltage class 220V
ZVF11-M/ S… 0004S2 00075S2 0015S2 0022S2
Applicable motor power( KW) 0.4 0.75 1.5 2.2
Output Output current 2.3 4.5 7.5 10
Maximum output voltage( V) Three-phase 0~ input voltage
Range of output frequency( Hz) 0.0~ 400.00Hz
Input Range of input voltage 160~ 240V
Range of input power frequency 50/ 60Hz+ / -55Hz
Control characteristics Control mode SAPWM space vector control
Frequency resolution Digital setting: 0.01Hz; Analog setting: Maximum frequency: 0.1%
Torque characteristics Adjustable from 0% to 20%
Overload capacity 150% of the rated output current per minute
Acceleration/ Deceleration time Adjustable from 0.1 to 999.9
Linear/ Quadratic
Running characteristics Frequency setting signal Panel control Set by the key or the potentiometer on the panel
External signal Terminal 0~ 10V, 4~ 20Ma, 0~ 10KHz, UP/ DOWN, 485 COM etc.
Operation setting signal Panel
Control Set by key RUN or STOP
Extent signal External FWD, REV and JOG operation, PLC operation and com operation
Multi-function input signal Multi phase spped, counter, program run, VI/ CI shifting and etc.
Multi-function output signal Failure, running, counter arrival, frequency arrival program running
Analog output signal Running frequency, output voltage, current, motor rotation
Other functions AVR, overvoltage and current stall prevention, no reversal and etc.
Protecting functions Overvoltage, overcurrent, under-voltage, overload, overheat, short circuit protection and etc.
Cooling mode Forced air cooling
Ambient Points of use Attitude