Specification :

Application

-Used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor.

-Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards and control panels, driver desks etc.

Construction

Conductor
Flexible tinned annealed copper wires, stranded as per HD 383 ( IEC 60228) class 5

Insulation
LSZH elastomeric compound as defined in EN 50264-1 ( EM 101 to EI 104)

Outer sheath
LSZH elastomeric compound as defined in EN 50264-1 ( EM 101 to EM 104)

Electrical & Mechanical Properties

Nominal Voltage 300/ 500 V or 0.6/ 1 kV
Maximum Conductor Temperature + 90 deg ( fixed installation)
Minimum Permissible Ambient Temperature -25/ -40 deg ( fixed installation)
Bending Radius 3 x Overall Diameter ( D12mm)

Chemical & Environmental Properties

EN 60684-2 No fluorine
EN 50305; EN 60811-2-1 Resistance to oil & fuel
EN 50305 Resistance to ozone

Fire Performance for rolling stock application

EN 50306-2 Hazard levels HL1, HL2/ HL3, HL4
DIN 5510-2 Protection level 1/ 2/ 3/ 4
BS 6853 Interior use 1a, 1b, II; Exterior use 1a, 1b, II
NF F 16-101 FO

Fire Performance in general

EN 50265-2-1; IEC 60332-1; BS 4066-1 Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3C; Fire propagation of bunched wires and cables;
VDE 0472 Teil 804; BS 4066-3; NFC 32070
EN 50268-2; IEC 61034-2; VDE 0472 Teil 816 Smoke density
EN 50267-2-1; IEC 60754-1; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/ 3; IEC 60754-2; VDE 0472 Teil 813 Corrosivity of gases ( Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Toxicity index
NFF 16101; NFF 63808; BS6853 Smoke index