Specification :

LAND RANGE DISCOVERY CAR
Armor Conversion Modifications / Alterations
- Five side armoring of passenger compartment ( roof and verticals) to provide protection
Against 7.62x51mm, M80 NATO Ball ammunition, in accordance with CEN B6, at zero
Degree obliquity angles.
- Floor of the vehicle is fitted with a blast protection to protect occupants against
Fragmentation from simultaneous detonation of 2 DM-51 German ordnance hand
grenades or equivalent.
- Vehicles armor plates are stitch-welded using high-intensity MIG welders, ensuring
the structural integrity is uncompromised by thermal and chemical variations of the
material.
- Ballistic steel interior frame provides overlap and backup protection for the large surface
Principal impact areas such as the doors and windows. All door/ window
openings are
Overlapped.
- Vehicle armoring constructed in such a way as to ensure that a projectile following a
linear or angled path shall not enter the vehicles interior without contacting the armor
material. In addition to this, the possibility of a projectile entering the vehicles interior
due to a ricochet from the armor shall also be minimized.
Glass
- A combination of glass, polycarbonate and Mylar are bonded together using the latest
Technology, producing one of the finest transparent armors available while
incorporating the following qualities:
- Glass thickness: 39mm.
- Anti-spall shield protecting against shattering glass
- Multiple impact protection
- Finest optical quality, Minimal distortion
- No de-lamination, no discoloration from UV rays
Interior
- All original OEM interior panels and trim will be resized or modified and re-installed
Wherever possible to obtain as close to an original look as possible
- The cargo area of the vehicle is protected by a swing door with view glass and two gun
ports, without disrupting the original manufacturers appearance.
Doors
- Armor overlap at all doors to prevent penetration through door posts and pillars.
- Door pillars reinforced to accommodate the additional weight of the armored door.
- Heavy Duty door hinges, designed and manufactured for extended longevity and easy
Maintenance
- Heavy Duty door travel retainers
Electrical
- All electrical equipment standard to this vehicle shall be tested and modified as
necessary to protect against the armoring process.
- Any additional ( optional) electric equipment installed on the vehicle shall be
individually fused; all wires are loomed and marked.

Need more information please dont' hesitate to contact with Armored Cars UK. Thanks.