Specification - Range: 0 to 9999 mm, at steel velocity - Material Velocity: 1000 to 9999m/ s - Display Delay: -20 to 3400 ¼ s - Probe Delay/ Zero Offset : 0 to 99.99¼ s - Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked. - Test Modes: Pulse echo, dual element and thru-transmission - Pulser: Tunable Square Wave Pulser - Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz - Pulse Energy: Low, Medium and High - Damping: 100, 200, 400 ohms - Bandwidth ( amplifier bandpass ) : 0.5 to 15 MHz - Gate Monitors: Two independent gates controllable over entire sweep range - Rectification: Positive halfwave, negative halfwave, fullwave, RF - System Linearity: Horizontal: + / -0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy + / -1 dB. - Reject ( suppression) : 0 to 80% full screen height - Units: Inch or millimeter - Transducer Connections: BNC or LEMO - Power Requirements: AC Mains 100-240 VAC, 50-60 Hz - Operating Temperature: -10° C to 50° C - Storage Temperature: -30° C to 50° C