Specification :

UM-1D Thru-Paint or Coating Ultrasonic Thickness Gauge
Introduction
The UM-1D is a simple to use, high accuracy, hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and even to eliminate the thickness of the paint or coating. You can now test painted tanks, pipes, etc., without needing to remove the paint or make corrections for the paint thickness.

Features and Specifications
Operating principle:
Standard mode: P-E ( pulse-echo) method with dual-element probes
Coating mode: E-E ( echo-echo) method with dual-element probes
Probe zero adjustment:
Selectable: 1-point calibration: normal measurement
2-point calibration: curve surface measurement or other special application with a high precision

V-path correction: Automatic

Measuring range: 0.8mm to 300mm; 0.031in to 11.81in in standard mode

3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode

Depending on probe, material and surface condition

Digital resolution: 0.001in or 0.1mm

Units:

Selectable: inch or mm

Display:

128× 64 dot-matrix LCD screen ( 1.65in× 2.24in; 42mm× 57mm)

EL backlight and switchable contract ratio

Digit height: 0.54in or 13.75mm

Measurement update rate:

4 Hz in standard measurement mode

25 Hz in MIN capture mode

Material velocity range:

1000 to 9999 m/ s; 0.039 to 0.394 inch/ µ s

Power:

Two 1.5V AA alkaline batteries

Warning with low battery voltage

Operating time:

Up to 200 hours ( without backlight) with alkaline batteries, depending on operating mode

Auto shut-off:

After 5 minutes of non-use

Operating temperature:

-10 to + 50 ; + 14 to + 122

Specification to -20 / -4 on request

Size:

5.86in× 2.87in× 1.25in; 149mm× 73mm× 32mm ( H× W× D)

Weight:

200g; 7oz ( including batteries)

Data logger capacity:

Up to 500 readings can be divided into a maximum of 5 files ( user-selectable)

Operating language:

English and Chinese

Measuring error:

Up to 1in: ± 0.002in or ± 0.1mm

Above 1in: ± 1% H

H is the height of the testing object

Repeatability:

± 0.001in or ± 0.1mm

Application software:

UMVIEW

Interfaces:

Serial RS 232C port in combination with a communicative cable;

Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.

Standard package:

UM-1D thickness gauge

Standard probe ( PT-08)

Carrying case

Two 1.5V AA alkaline batteries

Couplant

Operating manual

Certification of quality

Packaging list

Optional accessories:

Attachable rubber case

Numerous special probes on request

Couplants and high-temperature couplant

4-step/ 6-step block for calibration

Data transmission cable

Application software