WS-C2415 6A/ 10A/ 15A Solar power controller CE RoHS

Price:

$13.1/PC

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

50PCS/CTN

Pack. & Delivery:

131*100*31

WS-C2415 6A 10A 15A Solar intelligent panel controller for PV system

Certification CE RoHS ISO9001
Size 134* 100* 31 mm; Weight : 260g

The WELLSEE Solar Charge Controller ( WELLSEE PV controller, battery controller, solar regulator) applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation.

WS-C series charge controllers apply to all types of photoelectric panels and various types of batteries, MCU ( Micro-Processing Controller) has PMW ( Pulse Modulation Wide-frequency) 0~ 100% variable duty cycle process. According to the types and actual charging situation of the battery, WS-C controller series can provide the fast and best charging voltage and electricity from the PV panel. C30 and C60 series are equipped with advanced man-machine interactive function, so the user can adjust the charging voltage.

Functions:
1. Applying with various types of batteries
2. Automatic recognition of input voltage
3. Micro processing controller Pulse Modulation Wide-frequency PWM charge
4. Temperature sensor for charging a battery
in compensation
5. Overload protection ( automatic comeback)
6. Overcharge protection
7. The temperature compensate
8. Short circuit protection ( automatic comeback)
9. Thunder protection
10. Reverse discharge protection
11. Converse polarity connection protection
( automatic comeback)
12. Low voltage protection

1. Safety

The factors referring to users and property safety have been considered when designing the products. However the incorrect connection may cause the breakdown of system and even safety accident. For your safety and interests, the following rules must be observed during the operation.

Installation of this product shall be carried out by professional staffs. If user is not sure with the installation procedure, please contact the local agent of our company.
Prevent any liquid from spattering on controller. Do not clean the controller with wet cloth.

Keep children and incapacity persons away from controller.

Keep controller away from electrical heater, warmer and other source of heat; avoid controller from sun beat.
Please check the rated voltage of solar panel, battery, and loads before connection. Their rated voltages all should be 12V ( or 24V) .
Make sure to connect the positive and negative poles among Solar panels, Battery and Loads correctly.
The diameter of connecting cable must be sufficient for the loads.
The total rated current of solar panel and loads must be less than controller’ s rated current.
Components of system must be correctly and firmly connected.
Connecting wired battery positive and negative poles directly is prohibited.

2. Features

CPU controlled WS-C24 ( 16A-24A) solar charge controller is able to adjust the charge current and decide if to supply the loads electricity according to the voltage of battery. The product also has following features:

Generally keep the battery on full voltage condition.
Prevent the battery from over-charging.
Prevent the battery from over-discharging.
Prevent supplying electricity from the battery to solar panels during nights.
Reverse Polarity Protection for Battery
Reverse Polarity Protection for Solar panels
When the current of load exceeds the rated one of controller, the controller will activate the protection mode and lock up, the screen shows “ Overload� .
When short circuit happens, the Controller will activate the protection mode and lock up, the screen show “ Short circuit� .
When the battery’ s voltage is low, the controller will automatically cut off loads from system and resume its working once the voltage of battery is back to normal.
Protection from the lightning strike
When Controller is normally working, the LCD Screen will show the voltage of battery, charging current and current of loads in turn in every 5 seconds.
Controller is always counting and saving the Charging Current Hours and Discharging Current Hours of the Battery.
When controller starts up, controller will self-setup the Charging-off voltage, the Load-off voltage and the Load-on voltage according to the voltage of battery. These default parameters are setup as the standard environment temperature is 25° C. According to varies system temperature, the controller will automatically compensate the temperature of the charging voltage.
Users could setup the Charge-on or off voltage, the load-off voltage, the Load-on voltage, etc, according to their requirements.
To prevent battery from over discharging, Controller will automatically control the lowest Load-off voltage of the load, which is no less than 10V ( as per 12V battery) or 20V ( as per 24V battery) . If voltage of the battery is less than 10V ( or 20V) , the button “ -� will stop working.
To recover the default parameters, please keep pressing the button “ Menu� for over 5 seconds.

Attention!
Correctly connect the electrodes of solar panels, battery and loads!
Choose the proper wire according to the current of the loads; the diameter could not be too small. Bigger than 4 mm2 wire is suggested!

3. Trouble Shooting

Trouble: Green light goes out, the loads stops working, and LCD Screen shows Battery low
Reason: Low voltage of battery
Solution: Charge the battery or change the battery

Trouble: Green light goes out, the loads stops working, and LCD shows Over load
Reason: Overload
Solution: Reduce the quantity of loads and then press Button Reset

· Trouble: Green light goes out, the loads stops working, and LCD Screen shows Short circuit
Reason: Short circuit is happening in system.
Solution: Disconnecting the malfunction and then press the button Reset

· Phenomenon: Green LED is on
Loads are working properly
· Phenomenon: Red LED is on
Battery is charged up strongly
· Phenomenon: Red LED is flickering
Battery is charged up in constant voltage ( or floating )

· Trouble: Red LED goes out
Reason: Charge-off of battery
Solution: This is the common phenomenon during nights. If it is so during days, please carefully check the connection among Solar panels, Controller and Battery.

Please note: only 20A, 25A, 30A, 40A. 50A, 60A has LCD display.
6A, 10A, 15A don' t have.

Recommend to your friends