Specification :

Together with this we introduce the Wayang Windu CV. Is a company engaged in the areas of procurement specialists and Spareparts Service Air Compressor System as follows below:

1. Screw AIR COMPRESSORS ARE we do:
* Atlas Copco Compressors * Hydrovance Compressors
* * Alup Compressor Ingersollrand Compressors
* Joy * Compressors Bauer Compressors
* * Boge Compressor Kaeser Compressors
* Champion * Compressor Kobelco Compressors
* CompAir / Broomwade Compressors * Rotorcomp Verdichter GmbH
GreComp * * Sullair
* Hamworthy Compressor

2. Piston AIR COMPRESSORS ARE we do:
* Puma * Hitachi Bebicon Iwata * * * Ingersollrand Meiji
* Fini * Puma * Swan

3. Compressor Parts
* CAP Service Kits for Rotary Vane Compressor
* CAP Air Line Element (Domnick Hunter Filters Ltd, Ultrafilter 80 & 90 series, Zander,
Deltech, Hiross, OMI)
* Air End CAP Comrota For Compressors Atlas Copco GA (ISO 9001 Quality standards)
* CAP Comrota End For Air Compressors Compare Broomwade (ISO 9001 Quality
standards)

* Air Filter Element Filter Lubrican Oil * Oil Filter * Oil separator, Rubber coupling * * * Maintenance Kits Service Kits * Comrota Air End

4 Compressed Air CONDENSATE
* Water Saving Product Condensate Drains * * * Condensate cleaners Control Valve

* * Maintenance Kits Service Kits

Therefore this introduction we submit, of concern we thank you.

Sincerely,
Wayang Windu CV.

INFO PRODUCT
JORC COMPRESSED AIR CONDESATE MANAGEMENT SPECIALIST

OPTIMUM, SMART GUARD, SMART GUARD PRO, TEC 11, TEC- 22, TEC -33, TEC - 44, TEC - 55, EZ-1, COMBO, XP, D-LUX, PURO, PURO MIDI, PURO GRAND, PURO GRAND XTENDER, PURO DISTRIBUTOR, ENVIRO, LOCATOR, AIR SAVER, NUFORS, MAGY.

A. ZERO AIR LOSS DRAINS :

Zero Air Loss Drain Type : SMART GUARD PRO
The SMART GUARD PRO is a zero air loss electronic level sensing condensate drain, By installing the SMART GUAR PRO you prevent the loss of valuable compressed air during the dischange of condensate.

Zero Air Loss Drain Type : SMART GUARD PRO BIO
The SMART GUARD PRO is a zero air loss electronic level sensing condensate drain, By installing the SMART GUAR PRO you prevent the loss of valuable compressed air during the dischange of condensate in addition , potential bacteria build up ( and air – locks ) are also blown out.

Accessories for the zero Air Loss Drain

Zero Air Loss Drain Type : NUFORS
The NUFORS is a zero air loss pneumatically operated condensate drain, By Installing the NUFORS you provent the loss of valuable compressed air during the discharge of condensate and save the cost of electricity.

B. TIMER CONTROLLED DRAINS :

Timer Controlled Drain Type OPTIMUM up to 16 bar
The OPTIMUM is the premium timer controlled condensate drain and is offered with the widest range of options combined with the highest rate of reliability.

Timer Controlled Drain Type EZ-1 up to 16 bar
The EZ-1 is the economy timer controlled drain, through still incorporating the higherst possible reliability factors.

Timer Controlled Drain Type OPTIMUM - HP up to 80 bar with a brass valve body
The OPTIMUM-HP is the high pressure version of the OPTIMUM timer controlled drain and is offered with a brass valve body up to 80 bar.
Air leacks are a concecern for anyone operating a compressed air system The Locator is designed to save valuable compressed air.

Timer Controlled Drain Type OPTIMUM –S-HP up to 400 bar with a stainless eel valve body.
The OPTIMUM-S-HP is the stainless steel and high pressure version of the OPTIMUM timer controlled condensate drain and is offered with a stainless steel valve body up to 400 bar.

Timer Controlled Drain Type COMBO up to 21 bar ( ANALOGUE )
The COMBO is a timer controlled timer drain with an integrated ball valve strainer.

Digital Timer Controlled Drain Type COMBO-D-LUX up to 21 bar
( DIGITAL )

Timer Controlled Drain Type TEC-11 up to 16 bar
The TEC-11 is on in line timer controlled condensate drain, specifically designeed for compressed air ( micro ) filter applications.

Timer Controlled Drain Type TEC-44 up to 40 bar
The TEC-44 is a motorized ball valve designed to drain high viscosity condensate at pressure ratings up to 40 bar.

Timer Controlled Drain Type TEC-55 up to 80 bar
The TEC-44 is multi point timer controlled condensate drain, designed to control up to four draining point.
Accessories for Timer Controlled Drain
Replacement COILS for TEC-11
Replacement COILS for OPTIMUM (including the version S, HP, S-HP )
Timers

C. AIR SAVING :
Air Saving Product Type LOCATOR
Air leacks are a concecern for anyone operating a compressed air system The Locator is designed to save valuable compressed air.

Air Saving Product Type AIR SAVER
Air leacks are a concecern for anyone operating a compressed air system The Air Saver is designed to save valuable compressed air.

D. CONDENSATE CLEANER :
Condensate cleaner PURO
Condensate separator of mineral and synthetic lubricants for compressed air applications.
Replacement elements for the PURO
Replacement Product for the PURO
Condensate Cleaner ENVIRO
Condensate separator of mineral lubricants for compressed air applications.
Replacement Element for the ENVIRO

Zero Air Loss Drain Type : SMART GUARD PRO
The SMART GUARD PRO is a zero air loss electronic level sensing condensate drain, By installing the SMART GUAR PRO you prevent the loss of valuable compressed air during the dischange of condensate.

Specifications :

Max Compressor Capacity : 85 m3 / min ( 3000 cfm )
Max Drainage capacity : 300 litres condensate per hour ( 79 US Gallons / hour )

Min / Max. Pressure : 0 to 16 bar ( 230 psi maximum )
Min / Max. temperature : 2 C to 50 C ( 35 F to 122 F )

Voltage supply : 230 VAG or 115 VAC
Electrical protection rating : IP65 / NEMA 4
LED ON : Yes

Condensate inlet connections
Top and bottom : ½ “ BSP or NPT
Condensate discharge
Outlet Connection : ½ “BSP or NPT

Type of valve applied Direct operated
Valve seals FPM (Viton)
Valve Internal parts Stainless Steel
Head material Die cast brushed aluminium
Body material Poly Amide, Fibreglass reinforced fire resistant

The sensors in the SMART GUARD PRO do not come into contac with the condensate !

Supplied with 2 meters ( 6 ft. ) power cable
Options : Potential free alarm contact
A1 = Normally open contacts, closed when in alarm fase
A2 = Normally closed contacts, open when in alarm fase

Floor / wall mounting bracket including all fixings
Service KIT

DESIGNED TO PERFECTION

Zero Air Loss Drain Type : SMART GUARD PRO BIO
The SMART GUARD PRO is a zero air loss electronic level sensing condensate drain, By installing the SMART GUAR PRO you prevent the loss of valuable compressed air during the dischange of condensate in addition , potential bacteria build up ( and air – locks ) are also blown out.

Specifications :

Max Compressor Capacity : 85 m3 / min ( 3000 cfm )
Max Drainage capacity : 300 litres condensate per hour ( 79 US Gallons / hour )

Min / Max. Pressure : 0 to 16 bar ( 230 psi maximum )
Min / Max. temperature : 2 C to 50 C ( 35 F to 122 F )

Voltage supply : 230 VAG or 115 VAC
Electrical protection rating : IP65 / NEMA 4
LED ON : Yes

Condensate inlet connections
Top and bottom : ½ “ BSP or NPT

Condensate discharge
Outlet Connection : ½ “BSP or NPT

Type of valve applied Direct operated
Valve seals FPM (Viton)
Valve Internal parts Stainless Steel
Head material Die cast brushed aluminium
Body material Poly Amide, Fibreglass reinforced fire resistant

NOTE : During the blow out phase one second of compressed air is lost.

The sensors in the SMART GUARD PRO BIO do not come into contac with the condensate !

Supplied with 2 meters ( 6 ft. ) power cable
Options : Potential free alarm contact
A1 = Normally open contacts, closed when in alarm fase
A2 = Normally closed contacts, open when in alarm fase

Floor / wall mounting bracket including all fixings
Service KIT

ANTI – AIR LOCK

Zero Air Loss Drain Type : NUFORS
The NUFORS is a zero air loss pneumatically operated condensate drain, By Installing the NUFORS you provent the loss of valuable compressed air during the discharge of condensate and save the cost of electricity

Specifications :

Max Compressor Capacity : 85 m3 / min ( 3000 cfm )
Max Drainage capacity output: 200 litres per hour

Inlet Connection and height : ½ “ 8.5 cm from floor
Outlet connection : 3/8 “

Min system Pressure : 3 bar
Max. system Pressure : 16 bar

Supply valve operating pressure : 3-5 bar

Minium medium temperature : 2 C
Max. medium temperature : 50 C

Valve orifice : 7.0 mm
Type of operating valve : Direct actin
Valve Seals : Viton ( FPM)
Housing material : Anodised aluminium
Test button : Yes
Sight glass : Yes ( 1 ½ “ )

The NUFORS Offers your customer a calculable cost saving ( electricity ) over and above the cost savings that traditional zero air loss drains offer.

Timer Controlled Drain Type OPTIMUM up to 16 bar
The OPTIMUM is the premium timer controlled condensate drain and is offered with the widest range of options combined with the highest rate of reliability