Specification :

This test kit consists of five different tests which enables marine engineers to test engine oils, gear oils, hydraulic oils, etc. on board and in a relatively short time. The tests are simple and provide information on the most important parameters of used oils and the results obtained are a reliable source of information for the responsible engineer to judge the condition of the oil.

The five tests involved are:
* Viscosity
- check on 1. correct viscosity grade
2. fuel dilution
3. contamination
* TBN value
- check on 1. additive degradation
2. additive depletion
3. oilgrade
* Water content
- check on 1. water leakages lube oil separator
2. operation contamination
* Nature of water
- check on salt, brackish or fresh water
* Blottertest
- check on insoluble contaminants like soot and
other combustion products

Contect Lube Oil test Kit

DISPOSABLE SPARES PACKED IN A SPARATE CARTON

Syringes 1 ml 100 pcs
Syringes 5 ml 100 pcs
Syringes 10 ml 100 pcs

Contents of the test kit

Test Water %
Reaction vessel complete 1 pcs
Water free diluent 1 pcs
Water test solution, 50 ml 1 pcs

SALT
Quantab strips, box of 12
Separation funnel 1 pcs
Distilled water, 50 ml 1 pcs
Reagends DG, 10ml 1 pcs
Glass vials 2 pcs

ALAKLINITY ( TBN)
Reaction vessel complete 1 pcs
TBN Test Solution, 500ml 1 pcs
Magnetic stirrer 1 cs
Magnets 2 pcs

ISOLUBLES TEST
Filter paper A4 20 pcs
Perforated template 1 pcs

VISCOSITY
Visgage, model 76s 20cSt - 400cSt

SAFETY
Safety goggles