Specification :

The M15C coaxial series loudspeaker is fitted with a coaxial cone transducer. It features a coaxial point source in the transducer unit structure. This eliminates phase differences between high and low frequencies .And it provides no distortions due to distance and time differences among source points .Driven by the coaxial structure, the sound spreads in perfect sonic symmetry.
Frequency range ( -6dB) 60 Hz to 19 kHz
Sensitivity ( f> 80Hz) 98dB
SPL ( AES) 123dB SPL
Peak SPL 126dB SPL
Nominal directivity ( -6dB) Conical 90° waveguide
Nominal impedance 8 Ohm
Transducers 15" ( 250mm) bass driver
1" ( 25.4mm) compression driver
Rated Power( AES) 350W
Rated Power( PEAK) 700W
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors
Finish: BLACK
Protection grill Acoustically transparent perforated steel, 1.5mm thick
Connectors 4 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging: 6 standard points
Dimensions ( H x W x D) 660 x 440 x 456 mm
Weight Net unit weight 30.4kg
Gross weight, packed 33.4kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+ , cold pin 1-.