Specification :
The TKM 15 asymmetric enclosure provides typical angles needed for ceiling and wall mounting as well as for stage monitor operation.
The loudspeaker’ s high-frequency section comprises a 1-inch diaphragm compression driver coupled to a Conical 80 degree waveguide constant directivity horn. A high-power 15-inch magnet cone drivers , mounted in an optimally vented enclosure, reproduces low frequencies.
Frequency range ( -6dB) 65 Hz to 18k Hz
Sensitivity ( f> 80Hz) 98dB
SPL ( AES) 123dB SPL
Peak SPL 126dB SPL
Nominal directivity ( -6dB) Conical 80° waveguide
Nominal impedance 8 Ohm
Transducers 15" ( 380mm) bass driver
1" ( 25.4mm) compression driver
Rated Power( AES) 350W
Rated Power( PEAK) 700W
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors
finsh : BLACK
Protection grill Acoustically transparent perforated steel, 1.5mm thick
Connectors 4 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand —
Rigging: 6 standard points
Dimensions ( H x W x D) 728 x 465 x 448 mm
Weight Net unit weight 32.9kg
Gross weight, packed 35.9kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+ , cold pin 1-.