Functions 1.The extruding machine is specially made for producing PP film, the manufacturing film’ s thickness with the range is in 0.06^ 0.2mm, the production speed of 0.2mm thickness film is 15M/ m. 2.The screw’ s diameter is Ø 100mm and the material is SACM-645 HRC60 , the proportion of L/ D is 34 1, the design for particular screw is use mix-chain function, it can get very well result of dispersion and ensure the sheets comes out with even and smooth color, minimum amount of grains. 3.The T-die width is 1600mm, the inside mold is processing by particular polished-chrome and it can make the film with more clear transparency. 4.Use the Sway Arm type way to adjust the air-knife, easily control and it can make the film quickly take shape and also to save plastic material wasting. Features 1.The whole machine’ s motor is use the frequency conversion control, stable extrude and less noise, power and energy saving mode. 2.The whole machine is use human machine interface to control the monitor, control easy and very accurate, low breakdown rate. 3.The temperature control by PID, the temperature’ s tolerance is ± 1 . On the barrels section install a compulsory type of cooling-fan blower, it can control the temperature very accurately during the plasticization process. 4.The high-speed cutting machine is control by the micro-computer, cutting fast and it can provide non mistake cutting length