Specification :

CAS: 9002-88-4
LDPE
Products Form
Color: Milky white Shape: Round granular
Physical Properties
LDPE has good toughness, low temperature resistance, creep, and large thermal expansion.
LDPE is easy to process molding, can be extrusion, blow molding.
Item LDPE
Density( g/ cm3) 0.92
Tension strength/ Mpa 18
Elongation/ % 1000
Embrittlement temperature -35
Melting Point/  155
HDPE-High Density Polyethylene
Grade: Blow molding grade, injection molding grade, etc.
High-density polyethylene ( HDPE) or polyethylene high-density ( PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum ( in terms of energy and raw materials) to make one kilogram of HDPE.
Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
Property Unit Typical Value
Mass density g/ cm 3 0.941-0.959
Melt flow Rate( 190 centidegree / 2.16kg) g/ 10min d1.0
Tensile yield strength MPa e19.0
Flexural modulus Mpa e965
Elongation@ break % e400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Package: 25KG pp bag or as buyer' s request