Specification :

Replace Messy Mist Systems - Improve Dry Machining with Clean, Cold Air !

A new solution to an old problem. Heat build up on Dry Machining operations reduces tool life and machining rates. The Cold Gun Aircoolant System produces a stream of clean cold air at 50°F (28°C) below supply air temperature. Operation is a quite 70 dBA and there are no moving part to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolant cannot be used.

The cold Gun is also an alternative to expensive mist systems. It eliminates the costs associated with the purchase and disposal of cutting fluids and worker related health problems from breathing airbone coolants or slipping on wet shop floors.

EXAIR's Cold Gun is non-adjustable to prevent freeze-up during use. Cold airflow and temperature drop are factory set to optimize the gun's cooling capability.

applications :
* Tool sharpening
* Drill & cutter grinding
* Routing
* Plunge and form grinding
* Milling
* Surface Grinding
* Drilling
* Tire grinding
* Band sawing
* Plastic machining

Advantages :

* Improves Production Rates !
* Prevent Burning !
* Extend Tool Life - Reduce Breakage !
* Improve Tolerance Control !
* Finish Parts is Dry !
* Prevent Smearing of Metal or Plastics !
* Quite - Only 70 dBA !
* No Coolant Cost !