Specification
Universal oven Model UNB 200
Standard equipment
Ventilation and Control
* natural convection
* continuous adjustment of pre-heated fresh air admixture
* vent connection with restrictor flap
* microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
* one Pt100 sensor class A in 4-wire-circuit
* integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
* digital LED- display of set and actual temperature as well as remaining process time
* resolution of display for set value and actual value 0,5 °C
Overtemperature protection (double)
* in case of total breakdown of sensor, the heating is switched off at approx. 10 °C above set value
* in case of failure of the switching element, the heating will be controlled by an additional relay approx. 10 °C above the set temperature
* in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
* for very sensitive and/or valuable load in terms of being non-reproducable, we recommend ovens of our E- and P-class guaranteeing an even higher safety standard
Textured Stainless Steel Casing
* w x h x d: 550 x 600 x 400 mm
* fully insulated stainless steel door with double locking and 4-point adjustment
* rear zinc-plated steel
Interior - Heating Concept
* w x h x d: 400 x 320 x 250 mm, 32 l
* easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
* 1 stainless steel grid
Temperature Range
* from +30 °C (however, at least 5 °C above ambient) up to +220 °C
Voltage / Power Rating
* 230 V (+/- 10%), 50/60 Hz
* ca. 1.100 W (during heating)
Packing Data
* net weight approx. 29 kg
* gross weight carton approx. 35 kg
* gross weight wooden case approx. 46 kg
* dimensions approx.:
carton w x h x d: 67 x 70 x 54 cm
wooden case w x h x d: 71 x 69 x 51 cm
* the appliances must be transported upright
Customs Tariff Number
* 8419 3990
Country of Origin
* Federal Republic of Germany
WEEE-Reg.-No.
* DE 66812464
Accessories
Perforated stainless steel shelf E0(x)
Stainless Steel Grid (for good air circulation) E3(x)
ready stock..
Indomonster Priority 14th Year
www.profilterindonesia.com
