Specification :

Features : Specifications :

* Compact Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable or installed use

* 1750 watts peak output power, 875 watts continuous

* Optimized for both portable/ rental or permanent-venue use

* 15-inch Differential Drive® lowfrequency driver for extended lowfrequency output

* Robust powder-coated die cast aluminum handles, designed for strength and comfort

* Integrated 35 mm stand mount

Frequency Range : 45 Hz to 20 kHz
( -10 dB)

Frequency Response : 60 Hz to 18 kHz
( ± 3 dB)

Coverage Pattern : 90° x 50°

Directivity Factor ( Q) : 12.6

Directivity Index ( DI) : 11 dB

Maximum Peak Output1 : 135 dB SPL 1m

Transducer Section :

Low Frequency Section : JBL 2265FF, 381 mm ( 15 in) dia., 76 mm ( 3 in) Dual Coil Neodymium Differential Drive® , Direct Cooled

Bandpass Nominal Impedance : 2 x 2 ohms

High Frequency : JBL2452H-SL, 100mm ( 4in) titanium damped diaphragm, 1.5in. exit

Bandpass Nominal Impedance : 8 ohms

System :

DPC1 Internal Amplification Output : 1750 Watts Peak

DPC1 Output ( Continuous IEC shaped pink noise into rated load impedance) : : 750LF/ 125HF Watts

Audio Input connector : XLR with loop-through

User Controls : 80 Hz Subwoofer High Pass Filter. Enable/ Disable 0-16 dB input Attenuator with 32 precision 0.5 dB steps

Signal Processing : DSP Based, resident in Input Module

System Management : DSP based limiters for mechanical

AC Power Oprating Range : 90-132 VAC/ 216-264 VAC, 50/ 60 Hz

AC Input Connector : Neutrik PowerCon

AC Loop-thru : Neutrik PowerCon

AC Current Requirement: : 6A per system at 120V, 3A

Enclosure :

Box Construction : 5/ 8in multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlexâ„¢ finish.

Suspension System : 13 M10 Fittings, 35 mm pole mount socket

Grille : 14 Gauge Black powder-coated perforated steel with foam backing

Dimensions
( H x W x D) : 613 x 434 x 359 mm ( 24.1 x 17.1 x 14.1 in)

Net Weight : 24.7 kg ( 55 lb)