Specification :

The design concept of this low frequency transducer arises from the need of achieve a more resistant loudspeaker that matches the more and more power given by ultimate amplification systems. In order to accomplish that, almost every component of the speaker has been reconsidered. The SM-110/ N incorporates a 2� voice coil made with high quality materials: copper round wire with high temperature bonding strength and fiber glass former. Moreover, it features a powerful magnet system with rear air ventilation. All these facts result in a 10� driver with extended and smooth low-mid frequency response, reduced harmonic distortion, good efficiency and excellent power handling ( 200 w AES) . The SM-110/ N is specially recommended for woofer applications.
Key Features
- High power handling ( 200 w AES)
- 2� ( 51.7 mm) copper voice-coil with polyimide fiber glass former
- Optimum winding length for increased linear excursion
- Designed for high power woofer applications

Technical Specifications
Nominal diameter 250 mm. 10 in.
Rated impedance 8 ohms.
Minimum impedance 7.2 ohms.
Power capacity 200 w AES
Program power 400 w
Sensitivity 95 dB 2.83v @ 1m @ 2pi
Frequency range 45 - 6500 Hz
Recom. enclosure vol. 20 / 50 l 0.71 / 1.77 ft.3
Voice coil diameter 51.7 mm. 2 in.
Magnetic assembly weight 2.9 kg. 6.39 lb.
BL Factor 13.2 N / A
Moving mass 0.038 kg.
Voice coil length 15 mm.
Air gap height 7 mm.
X Damage ( peak to peak) 28 mm.