DUAL REGULATING INDICATOR WITH MICROPROCESSOR CONFIGURATION AND TWO INPUTS, FOR VOLTAGE OR CURRENT DO9404, Merk : DeltaOhm[Sep. 1, 2009 23:29:54]
Specification
The dual regulating indicator DO 9404 is a microprocessor-controlled panel instrument with LED 96x96, with thresholds and alarms that may be programmed and configured by the user. In the two input channels it accepts signals coming from two distinct transmitters or from a double transmitter. The transmitters may be passive with 2 wires or active with 3 wires, in voltage 0÷1 V, 0÷5 V, 0÷10 V or current 0÷20 mA; 4÷20 mA.
For both input channels the configuration possibility is always present in the instrument, no extra cards are needed.
The choice of configurations for the input signals is made on the keyboard located on the front of the instrument.
The DO 9404 is provided with a serial output RS232C, the baud rate may be configured by means of the keyboard, the control is bi-directional and the output connector is a SUB D female 9-pole connector.
The instrument dimensions are in accordance with DIN 45700, 96x96 mm, depth 120 mm. The operating mode of the DO 9404 is chosen according to the application, configuring the instrument with the keyboard. It is possible to configure the instrument on the field with maximum simplicity to adapt it to changes in the process requirements.
The configuration possibility concerns the inputs, the extent of the scales, the set points, the alarms and the baud rate.
Applications
A typical application of the DO 9404 is the display and regulation of signals arriving from passive 2-wire or active 3-wire transmitters, of any physical quantity: temperature, humidity, pressure, speed, level, etc. for a wide variety of industrial sectors and automation.
Characteristics
- Set point may be configured from -9999 to +19999
- Indication with 1/2â red LEDS
- Separate terminal for each channel for voltage input 0÷10 V and current input 0÷20 mA, 4÷20 mA
- On the terminal board an auxiliary power supply is available at -5 Vdc max. 10 mA and +15 Vdc non-stabilized max. 44 mA for the possible feeding of passive 2-wire transmitters
- Instrument accuracy ±0.1% Rdg ± 1 digit
- A/D converter resolution: 0.05 mV/digit, 1 µA/digit
- Functions: Two relays with insulated HI LO exchange contact for channel 1: RL1, RL2
Two relays with insulated HI LO exchange contact for channel 2: RL4, RL5
One relay for the overall maximum and minimum alarms: RL3
Resistive 3A/230 Vac relay contacts
- Instrument working temperature: (electronic components) -5°C..50°C
- Power supply: 12÷24 ±10% Vac/Vdc.
