For measuring the deflection of flexible pavement under the action of moving wheel loads.

Fixed Beam :
- Alumunium profile frame, 3 points
adjuster, with vibrator and dial
....

For determining bitument content in hot mixed paving mixture and pavement sample)

BI - 300
Spect :
- Hand operated, alumunium housing
removeable cover and bowl, 1500 gr
....

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.

ASTM D-70 and AASHTO
T-228

( For determining the specific gravity of semi-solid bituminous materials, asphalt cement, and soft tar pitches by use of a picnometer)

....

ASTM D-113 and AASHTO T-51
( For determining ductility of formed asphalt/ cement or semi solid bitument by measuring distance of elongation before breaking point when two end of....

For determining flash and fire point by cleveland open cup for petroleum product and other liquids, expect fuel oils and materials having an open flash point below 79 deg C ( 173....

For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus.
Specification : ....

For determining bitument content in hot mixed paving mixture and pavement sample.
Consist of :
- BI-311 Reflux Extractor

Consist of :
- BI-311.1 Glass Jar; pyrex, 6" i.d
....

ASTM D-88 and AASHTO T-72
For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C.

Viscosimeter :
- Stainless steel bath, ....

For determining consistency of bituminous materials.

BI - 230
Spect :
- Penetrometer, Cast alumunium frame,
4 1/ 2" dial indicator, 400 x 0.1 mm dial,
single knob....

Feature :
The use automatic compaction will result in consistensi and repeatable laboratory specimens, suitable for BS 598. Testing houses and design consultants who use the....

A straight edge, approximately 3 meters in length and of straight section may be used to determine lateral surface regularity of a road surface. This lightweight apparatus is....

Percentage Refusal Density/ PRD, is defined as ratio of the initial dried density of the sample to the final density ( refusal density) expressed a percentage.

The sample bulk....

For determining the loss in mass
( exclusive of water) of ashpalt compound after heating asphalt

- Revolving Shelf Oven Variable
temperature oven, cast alumunium
rotating....

To determine the melting point of asphalt with a ring and ball method using a steel.

- Shouldered Ring Assembly Machined
Brass, Height Adjustment
- Standard Ball Steel ball, ....

For determining water in crude petroleum, tars and products derived from these materials.

- Flask, Heat resistance glass, 500 ml capacity
- Water Trap, Glass for receiving....