Products Catalog

Specification

The FALDIC-W
A brand new basic model of the FALDIC Series inheriting the functions and performance of the FALDIC-± and FALDIC-ß .
The FALDIC Series keeps evolving to meet all market requirements

• High-Resolution Encoder
- Ensures stable performance even at low speed.
- High-resolution encoder generating 131072 pulses installed
- Higher resolution reduces rotational flactuation, achieving smooth machine motions.

• Vibration Suppressing Control Function
- Suppresses mechanical vibration to the limit.
- Our original vibration suppressing control function ( patent pending)
- A “ Vibration Suppressing Control Function� is introduced, which is effective in controlling robot arm end vibration.
- Fuji’ s original “ Vibration Suppressing Control Function� is installed as a standard feature. It effectively reduces vibration, especially for low-rigidity units such as a robot arm end, and minimizes machine cycle time.

• Integral Control Of Parameters
- Realizes the integral control of parameters.
- Two RS-485 ports as standard
- RS-485 links the host controller to each servo amplifier, enabling the integral control of the servo amplifier parameters by the host controller.

• Control Power Back-Up Function
Besides the main power input, a control power back-up function is equipped, which is helpful in backing up sensor positions. This system cuts off the main power supply in an emergency, so you do not need to return to the original position each time.

• Easy Tuning
The servo amplifier itself automatically performs auto tuning by left and right movements. Optimum tuning between the machine and servomotor is attained before positioning adjustment by the host controller.

• Servo Analysis Function
This is a tool installed in the loader to be equipped with a personal computer, which analyzes the “ resonance frequencies� inherent in each machine to make effective use of the “ vibration suppressing control function, � the “ Notch Filter, � etc.

• Test Operation Function
Continuous reciprocation is supported in addition to JOG operation in a single direction. You can easily check the effective torque by rough actual operation before preparing the host controller.

• Monitor Output Function
An analog monitor output function is equipped on the front of the servo amplifier. Connect a special connector to it to observe signals. Two signals can be observed from the return speed, torque command, positional deviation, etc.

• Side-by-side Installation
Servo amplifiers can be installed side by side, which saves space required to install them in the machine enclosure

Contact Person :
CV. KITOMA

Address : Jl. Rusa I Blok G No.59 Jababeka
Cikarang Pusat – Bekasi 17852
Phone : 021 – 37250521
Fax : 021-89830881
Email : kitoma_kitoma@ yahoo.co.id
----------------------------------------