Specification :

130W CO2 Laser Power Supply For LaserMachine
1.Output open circuit protection
2.packing: carton or wooden cases

Main features:

1.Good compatibility: It can be applicable to 60W, 80W or 100W laser tube manufactured by various factories.

2.Cutting type or Sculpting type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. It can prolong laser tube’ s service life.

3.Easy Control: The start and stop of laser can be easily controlled by TTL level.

4.The power supply has output open circuit protection.

5.This power supply has TTL signal indication, water Through signal indication and laser output indicati

Main Technical Parameters:

AC Input Voltage AC220V or AC110V

DC Input Voltage
DC300V or DC150V

AC Input Frequency
47~ 440Hz

Voltage Output
50KV

Maximum Current
38mA ( depending on the laser tubes of different manufacturers)

Efficiency
91%

Overcurrent Protection
130% of maximum current

Open Circuit Protection
Yes ( short term)

Structure
Fan cooling

High Electric Level Control Voltage Range
e3V

Low Electric Level Control Voltage Range
d0.8V

Working Temperature
-30° C~ + 65° C

Relative Humidity
20~ 85% RH( no condensation)

Voltage Resistance
Input— Output
AC1500V1minutesd10mA

Input— Shell
AC1500V1 minutesd10mA

Output— Shell
Connection

Insulation Resistance
e50M© ( DC500V)

Earth Leakage Current
d1mA( AC220V) d0.5 mA( AC110V)

Vibration Resistance
Amplitude: 0.5mm frequency 10~ 55Hz3 dimensional direction 2 hours

MTBF
e30, 000hours

Test Time at Full Load and 60° C
12 hours

Power Supply Switch Test within 7 Seconds
500 times

Maximum Dimensions ( L* W* H)
350mm* 220mm* 95mm