Specification :

Description
pH/ mV/ Conductivity/ Temperature benchtop meter with dual LCD displays for conductivity and pH/ mV/ temp. Has dual analog voltage outputs for pH/ mV and conductivity. Connectors are BNC, Jenco 4-Pin Jenco screw type connector for 10K thermistor ATC. Features cell adjust and 4.01/ 7.00/ 10.01 buffer select. Built in transformer for 115/ 230 VAC operation or battery powered via 6 AA batteries.

* Simultaneous conductivity & pH / mv measurement
* Dual LCD displays
* CEll adjust
* Conductivity range selector
* Mv analog conductivity output
* Mv analog pH output
* BNC pH input or 3-in-1 pH/ ATC input
* Reference input for use with half cells
* Automatic temperature compensation
* 10k ¸ ATC thermistor
* Membrane switch with audio feedback
* High 50/ 60 hz ac noise rejection
* AC 120/ 230 v ac operation
* Battery operation, 6 aa batteries
* Power down memory back-up
* Splash proof case

Specifications
pH
Range : -2.00 to 16.00
Resolution : 0.01 pH
Accuracy : 0.1% ± 1 digit
ORP
Range : -999 to 999 mV
Resolution : 1 mV
Accuracy : 0.1% ± 1 digit
Cond.
Range : 0.0 us/ cm to 199.9 ms/ cm ( over 5 ranges) Resolution : 0.01 us/ cm to 0.1 ms/ cm ( over 5 ranges)
Accuracy : ± 0.1% F, S., ± 0.2% reading
Cond.
Range : 0.0 to 19.99 us/ cm Resolution : 0.01 us/ cm
Accuracy : ± 0.1% F, S., ± 0.2% reading
Cond.
Range : 0.0 to 199.9 us/ cm Resolution : 0.1 us/ cm
Accuracy : ± 0.1% F, S.,
± 0.2% reading
Cond.
0.0 to 1999 us/ cm
1 us/ cm
± 0.1% F, S.,
± 0.2% reading
Cond.
0.0 to 19.99 ms/ cm 0.01 ms/ cm
± 0.1% F, S.,
± 0.2% reading
Cond.
0.0 to 199.9 ms/ cm 0.1 ms/ cm
± 0.1% F, S.,
± 0.2% reading
temp.
Range : 0.0 to 100 ° C
Resolution : 0.1 ° C
Accuracy : ± 0.5° C ± 1 digit