Specification :

Brief introduction
PCF series Heavy Hammer Crusher, is also known as Box Crusher. It is applied to medium-hardness stone with hardness lower than 100 Mpa, such as limestone, malm, sandstone, shale, gypsum, coal and so on.

Characteristics:
PCF series Heavy Hammer Crusher set stone crushing and shape as a whole, with big feeding granularity and small outgoing granularity. Changing three-level crushing to first-level crushing, rotor speed is high, the hammer with great weight and durable service. It has advantages of large reduction ratio, great production, particles shapeliness, simple structure, easy maintenance, etc.
Adopt new design idea. Comparing with the same type produces, it has larger production and higher qualified rate, shapeliness particles, lower energy consumption.
Enable to crush wet or dry tow forms material, can handle higher water content materials, not blocking materials.
The replacement of wearing parts is very convenient, and the maintenance cost is low;
This equipment can replace the primary, secondary crushing of traditional jaw crusher and impact crusher, thus reduce the equipment investment.

Operating principles:
Rotor disk, driven under the motor, drive the hammerhead to do high-speed circular motion. Materials are carried into machine from the upper feeding inlet, crushing by the strike, impact, bump, and grind of the high-speed running hammerhead. After crushing, those materials with larger granularity than requirement hit the counterattack board for re-crush along the hammer tangent direction with the new materials, so that the coarse, medium and fine crushing all in one station, finally materials meeting requirement exclude from material outlet.

Technical parameter:
Specification Rotor( mm) diameter* length The size of charge( mm) The size of discharge( mm) Capability( t/ h) Motor power( KW)
0806 800× 600 d300-400 0-40 60 55
0808 800× 800 d400-500 0-50 80-100 75
1008 1000× 800 d500-650 0-60 100-120 90
1010 1000× 1000 d600-750 0-70 120- 150 132
1210 1200× 1000 d650-800 0-70 150-200 185
1510 1500× 1000 d800 0-80 16 0-250 200
1512 1500× 1200 d800 0-80 250-300 250
1615 1600× 1500 d900 0-80 300- 380 280
2015 2000× 1500 d1200 0-80 400-500 400