Specification :

Introduction
This product supports IEEE802.3 10base T/ IEEE802.3u 100base T/ 100base Fx protocol and IEEE802.3af PoE PSE application, internal AC/ DC power supply and PSE controller can output up to 25 watts ( DC48V/ 540mA) power into CAT5 twisted-pair cable.

Main feature
1. In conformity to IEEE 802.3 10 Base-T standard; in conformity to IEEE 802.3u 1000 Base-TX/ FX standard, IEEE802af PoE PSE compatible
2..Supports flow control for full and half duplex operation
3. Bandwidth control
4..Supports auto MDI-MDIX function
5. Supports link fault pass through function

Technical parameter
Standard protocol
IEEE802.3 10 Base-T standard; IEEE802.3u 100 Base TX/ FX standard, IEEE802.3af
Interface
* RJ-45 interface
The transmission media adopts CAT5 twisted-pair with maximum length of 100 meter ( 330 feets) .
* Fiber interface
SC/ ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely " TX-RX" , " RX-TX" ( direct butting for single optical fiber transceiver) .
* Power supply interface
The AC power supply is connected to AC input jack of media converter through the attached AC power cable.
Connector
one UTP RJ-45 connector, one SC/ ST connector, one AC-inlet connector;