deflection tester

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

1000

Pack. & Delivery:

wooden box

Deflection checking instument description
The instruments is mainly used for inspecting the radial bound , circular bound and end surface circular bound of the axial or disk parts . Instrument uses two top positioning axial parts, Rotating parts , then head was in part on the direction of the radial beat directly measured parts.
Main technique parameters:
1
The radial circular bound of the Morse No.2 finial 60° cone surface to the Morse coned0.005mm;
2
The parallelism between the finial axle within the scope of 100mm and the leading track ( parallel and vertical direction) d0.006mm;
3
The max diameter of the tested part is 100-560mm;
4
Measuring length200mm , 300mm
500mm
1000mm
1500mm, 2000mm
Feature: Simple structure, convenient operation, Finial pedestal hand grip can speed loading & unloading the tested parts and high efficiency
Packing : wooden case ( According to user requirements)
Color : green or blue ( According to user requirements)
Direction for use
Deflection checking instrument usage:
Deflection checking instrument is precision testing instrument, the operator must master the skills, equipment maintenance, carefully and assign
Use.
2.Defelction checking instrument must always keep equipment in good condition, equipment installation should be balanced to smooth surface, reliable guide and can' t knock against . The coaxial tolerance of final pedestal is L = 400mm range from a and b are less than 0.2 mm.
3. Before the workpiece inspection should use L = 400 test stick and the dial indicators to
( 3) Product maintenance
Deflection checking instrument maintain :
1.when you inspect the workpiece , should be take care. Guide surface does not allow any tools or workpiece on it .
2.when inspect the workpiece , you should maintain the instrument . Guide and final pedestal should greased preventing rusting and maintain a clean and tidy environment around..
3.Assign to some people check the precision and ensure accuracy of measurement equipment, and completes the actual condition
( 4) Additional remark
Some graphics and description in the instruction menual are just as a instruction, please according to real product.
This instruction manual dosen' t effect the product performance, safety and customer usage. If there is a difference between our product, for thepromotion of our products , please according to the real product, no other explanation.

Recommend to your friends