1.line array speaker 2.all neodymium drivers 3.Birch plywood, Water-proof 4.CE, ROHS certifica 5.good after-sales service... DESCRIPTION and APPLICATION The W-8 is a line array system which is made of two 12â neodymium woofers, four 6.5â midrange speaker units, two 3â titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. Model W-8 Type Line array system Frequency Response 45Hz-20KHz± 3dB Directivity index( DI) 12( ± 2) 1.2KHz-16KHz Power handling LF 1200W( RMS) 2400W( PEAK) MF 600W( RMS) 1200W( PEAK) HF 200W( RMS) 400W( PEAK) Sensitivity LF 101dB( 1W1M) MF 104dB( 1W1M) HF 111dB( 1W1M) MaxS.P.L LF 132dB( PEAK/ 1M) MF 132dB( PEAK/ 1M) HF 134dB( PEAK/ 1M) LF section 2à 12" ( 310mm) neodymium woofer 75mm( 3in) coil Nominal impedance 8 ohm MF section 4à 6.5" ( 170mm) neodymium MF 50mm( 2in) coil Nominal impedance 16 ohm HF section 2à 3" neodymium compression driver with 75mm titanium diaphragm Nominal impedance 16 ohm Output section 3-channel Dispersion pattern 110° Hà 7.5° V Finish Water-proof, wear-resistant textured black paint Array design Arrays of less than 3à CV-8 will provide poor dispersion control and are neither recommended nor supported Speaker cables LF 1( + ) 1( -) 2( + ) 2( -) MF 3( + ) 3( -) HF 4( + ) 4( -) Rigging system Please refer to the CV-8 user manual before any operation Input connectors 2à Neutrik NL8 Recommend crossover LF 45Hz-400Hz MF 400Hz-1200Hz HF 1200Hz-20KHz Dimensions 1100à 405à 595mm( Wà Hà D) Package dimensions 1170à 475à 665mm/ 0.37cbm Enclosure Birch Plywood Net weight 65kg Gross weight 69kg