SILAHKAN HUBUNGI KAMI

DIGITAL DIRECT / Residual SHEAR Apparatus
For determining shearing resistance of soil sample. Consist strain, hand operated. Shear loads are applicatedby a gear box loading jack....

SILAHKAN HUBUNGI KAMI

DIRECT SHEAR TST SET
For determining shearing resistance of soil sample. Constant strain, hand operated. Shear loads are applicated by gear box loading jack and measured by....

SILAHKAN HUBUNGI KAMI

MOTORISED COMPRESSION MACHINE
Electric 220 V AC, 50-60 Hz, 1000 watt, 1 Phase
Single action, variable speed
6000 ml reservoir capacity
Maximum working pressure 50000 kPa.
....

SILAHKAN HUBUNGI KAMI

HYDRAULIC CONCRETE BEAM TESTING MACHINE
For determining the flexural strength of concrete beam by using a simple beam with third point loading. 100 kN cap, hydraulic hand pump, ....

SILAHKAN HUBUNGI KAMI

AIR CONTENT of FRESH MIXED CONCRETE
ASTM C-231 / AASHTO T-152
For determining the air content of freshly mixed concrete from observation of the change in volume of concrete with....

SILAHKAN HUBUNGI KAMI

VIBRATING TABLE
For compacting aggregate in steel container or concrete sample in cube / cylinder mold.
Or concrete sample in cube / cylinder mold.
Dimension ( L x W x H) : 55....

SILAHKAN HUBUNGI KAMI

SLUMP TST SET
ASTM C-143 / AASHTO T-119
For determining slump/ workability of concrete both
In the laboratory and in the field.
Dimension ( L x W x H ) : 70 x 70 x 50 cm
....

SILAHKAN HUBUNGI KAMI

HYDRAULIC COMPRESSION MACHINE
Hydraulic electric Pump Compression machine
200 kN Capacity , ASTM C-39
For determining compressive strength of concrete cube 15 x 15 x 15 cm, or....

SILAHKAN HUBUNGI KAMI

DIGITAL TEST HAMMER
ASTM C-805
Automatic electronic calculating of the mean rebound number and compressive strength, Digital and print out of the full record of test result, PC....

SILAHKAN HUBUNGI KAMI

CALIBRATION ANVIL
ASTM C-805
The anvil is used to enable routine check to be made on the operation concrete test hammer

PLEASE CONTACT US FOR MORE INFOâ € ¦

SILAHKAN HUBUNGI KAMI

LABORATORY CONCRETE MIXER
For mixing trial bathes of concrete for mix design, Approx. 70 ltr cap, 4 mixing blades, welded steel frame, 2 wheel for easy movement, electromotor 1/ ....

SILAHKAN HUBUNGI KAMI

VERTICAL CYLINDER CAPPING
ASTM C-617
Equipment for forming caps on ends of 15 cm diameter
Concrete cylinder to provide uniform loading surface for compression test.
Dimension ....

SILAHKAN HUBUNGI KAMI

MODULUS of ELASTICITY IN CONCRETE TEST SET
For measuring average axial deformation of concrete cylindrical
Sample during compression test, cast alumunium, dial indicator 0, 001....

SILAHKAN HUBUNGI KAMI

CONCRETE TEST HAMMER CON DESTRUCTIVE TESTING
ASTM C-805
For rapid measure the resistant of concrete to input of penetration. From the measurement it is possible to obtain an....

SILAHKAN HUBUNGI KAMI

CONCRETE CYLINDER MOLD
Cast iron forming concrete cylinder sample
Dimension ( L x W x H ) : 15 x 15 x 25 cm / 20 x 20 x 35 cm
Gross weight : 12 kg / 17 kg
CONCRETE CYLINDER....

SILAHKAN HUBUNGI KAMI

CONCRETE CUBE MOLD
Cast iron, forming concrete cube sample
Dimension ( L x W x H ) : 20 x 20 x 15/ 25 x 25 x 20 cm
Gross weight : 14 kg / 19 kg
CONCRETE CUBE MOLD
10 x 10 x....

SILAHKAN HUBUNGI KAMI

CONCRETE BEAM MOLD
Cast iron, forming concrete beam sample
Dimension : ( L x W x H ) : 20 x 70 x 20 cm / 25 x 90 x 25 cm
Gross weight : 40 kg / 60 kg
CONCRETE BEAM MOLD
15 x....