Products Catalog

Specification

Pensky-Martens Closed Cup Flash Tester
Determines flash points of a wide range of products by a closed cup method with two option speed stirring of the sample. Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples.

Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob. Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule.

Electrically heated model is equipped with a 750W nickel-chromium heater with stepless variable control for accurate, repeatable temperature rate of rise settings per specifications. Heater unit is enclosed in a stainless steel housing with cooling vents. Includes line cord receptacle and switch for accessory slow speed stirrer.

Gas heated model has a built-in nickel plated brass natural gas burner, or can be supplied with an artificial gas burner or liquid propane burner (specify when ordering). Both models are mounted on a sturdy cast iron base.

Specifications
Conforms to: ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102; NF M 07-019

Electrical Requirements
115V 50/60Hz, Single Phase, 6.5A
220-240V 50-60Hz, Single Phase, 3.4A

Included Accessories
Brass Test Cup with Handle
Thermometer Holder

Dimensions lxwxh,in.(cm)
9.5x8x22.5 (24x20x57) with optional stirrer motor installed
Net Weight:
K16000: 21 lbs (9.5kg)
K16200/K16270: 24 lbs (10.9kg)

Shipping Information
Shipping Weight: 30 lbs (13.6kg)
Dimensions: 3.1 Cu. ft.