Products Catalog

Specification

� Temperature measurement, selectable for ºC and ºF
� 6040 counts with Bar Graph display
� MIN/MAX function enables to record min & max value
� REL(relative value) function to indicate the measurement variation
� DUTY function
� Data Hold function, Auto Power Off function
� Continuity with buzzer and Diode Check function
� Capacity measurement of capacitors
� Current ranges are protected by fuses
� Designed to meet international safety standards
IEC 61010-1 CAT.III 300V / CAT.II 600V

DC V : 600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10M©, 100M© only 600mV)
|±0.5%±2dgt (600.0mV/6.000/60.00/600.0V)
|±0.8%±3dgt (600V)
AC V : 6.000/60.00/600.0/600V
(Input Impedance: 10M©)
|±1.0%±3dgt (6.000/60.00/600.0V)
|±1.5%±3dgt (600V)
DC A : 600/6000µA/60/600mA/6/10A
|±1.2%±3dgt (600/6000µA/60/600mA)
|±2.0%±5dgt (6/10A)
AC A : 600/6000µA/60/600mA/6/10A
|±1.5%±4dgt (600/6000µA/60/600mA)
|±2.2%±5dgt (6/10A)
© : 600©/6/60/600k©/6/60M©
|±1.0%±2dgt (600©/6/60/600k©/6M©)
|±2.0%±3dgt (60M©)
Continuity buzzer : 0~600© (Buzzer sounds below 100©)
Diode Check : 2.8V Release Voltage:Approx. 0.4mA Test Current
Capacitance : 40/400nF/4/40/400/4000µF
Frequency : 10/100/1000Hz/10/100/1000kHz/10MHz
DUTY 0.1~99.9% (Pulse width/Pulse period)
|±2.0%±2dgt (~10kHz)
Temperature : -50~300ºC (-58~572ºF)
(with the use of Temperature probe 8216)
Note: KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market.
Display : 6040 Counts
Withstand : Voltage AC 3700V / 1min.
Applicable Standard : IEC 61010-1 CAT.III 300V Pollution degree 2
IEC 61010-1 CAT.II 600V Pollution degree 2
IEC 61010-031
IEC 61326
Power Source : R6P (1.5V) � 2 (Auto-power-OFF within 15 minutes)
Dimensions : 161(L) � 82(W) � 50(D)mm
Weight : Approx. 280g
Accessories : KTL04 (Test Lead)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) � 1built-in
10A/600V (Ceramic Fuse) � 1built-in
R6P � 2Instruction Manual