Specification :

The EOLS-1626-X series single mode transceiver is small form factor pluggable module for duplex optical data communications. This module is designed for single mode fiber and operates at a nominal DWDM wavelength from 1528.77nm to 1563.86nm as specified by the ITU-T. It is designed to deploy in the DWDM networking equipment in metropolitan access and core networks.
It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a DWDM multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses a high sensitivity APD detector and a limiting post-amplifier IC.
The EOLS-1626-XD series are designed to be compliant with SFF-8472 Multi-Source Agreement (MSA).

Features
* Available in all C-Band Wavelengths on the 100GHz DWDM ITU Grid
* Data rates from 100Mbps to 2.67Gbps
* Available in Long Reach 80km, 120km and 200km Versions
* Temperature-Stabilized DWDM DFB Transmitter
* Duplex LC Connector
* Hot-Pluggable SFP Footprint
* Built-in Digital Diagnostic Functions as Specified in the SFF-8472 MSA
* Operating Case Temperature: Extended: -5°C to 70°C

Applications
* SONET OC-48/SDH STM-16
* Amplified DWDM networks
* Ring topologies with fixed and reconfigurable OADMs
* Fast Ethernet, Giga Ethernet
* FiberChannel 1FC/2FC

Ordering information:
Part No.; Data Rate; Laser Distance*(note2) ; Interface; Temperature;
EOLS-1626-80X*(note1); 0.1~2.67Gbps; DWDM DFB; 80km; LC; Extended
EOLS-1626- BX; 0.1~2.67Gbps; DWDM; DFB; 120km; LC Extended
EOLS-1626-CX; 0.1~2.67Gbps; DWDM; DFB; 200km; LC; Extended

Note1: X refers to DWDM Wavelength range as ITU-T specified, please refer the following table for detailed center wavelength information.
Note2: Transmission on the 9/125¼m SM

Contact details:
Robert Lee
eoptolink@gmail.com
cis@eoptolink.com
www.sfp-xfp.com
msn: eoptlink_sfp@hotmail.com
skype: eoptolink-sfp