Specification :

Category:
The new products recommended - > low gravity coating BS - 3 series

Name of commodity:
BS - 92

Browse the number:
2031

Best metal coating series product adopt the latest UK technology, raw material is imported from abroad were all production, the product performance is stable, the most famous wheel manufacturer designated recommended product use.

Product specifications

Product name
performance
color
Dilution
Applicable part

Swage coating 38
Lubrication coating
Black paste
5-10
Gravity and low pressure casting mould of a connection between lubrication

Swage coating 34
Relatively coarse grain, but the adiabatic performance is the best
Gray paste
1-5
Thin section and large surface castings, also very suitable for feeding, ingate and wheel casting

Swage coating 36
Lubrication and wear-resisting performance, two strong bond
Black paste
1-5
Complex zinc and aluminum casting for the gravity casting brass and bronze

Swage coatings
The fine particles of quench coatings
White paste
1-5
Applicable to produce smooth lines requirements for the machining castings, also be hub

Swage coating 140
Particle medium coating
White paste
1-5
Applicable to general castings, especially suitable for gravity casting motorcycle rims and various piston castings, good heat insulation performance

Tools, crucible tanks, protective coating 110
Excellent water resistance and not sticky coating aluminum
rice
10-30%
Can brush or spraying in various iron tools, iron crucible, forming the refractory aluminum shell out surface, convenient and easy. Solidification,

Instructions

[mould ready]
First, must clean mould, remove all the old mold coating and NianJieWu, and to make its surface coarsening uniform. Will die of 250-350 heated evenly degrees Celsius (if the mold from line should be removed, cooling, clean, on heating). Then cooling - 180-240 degrees Celsius can start spraying.

[spraying]
Holding gun, and keeping a distance 200-300 microns, evenly spray layer, and meet the requirements of the coating thickness until. General thickness 75-125 microns requirements.
This company produces the coating can be used alone, also can use, also can be mixed according to the different requirements of different parts of the castings were combined use of coating, correct carefully, can make the product brocade, more outstanding.

Packing and storage

5kg/barrel 20kg/box (swage coatings for 4kg barrel, 16kg/box)

Store in dry, cool place, not less than 10 degrees Celsius temperature environment.