Specification :

Function:
A. Read and analyze your current ECU software;
B. Upgrade the ECU software with a re-mapped file ;
C. Repair ECU with software problems or corruption.

Install:
A: You need a computer. Install KWP2000 Plus software.
B: Connect USB cable to your PC;
C: Connect to your car via standard 16-pin OBD2 connector;
D: Supports high speed ECU flashing
E: Led indications for USB-power Car-power/ rx/ tx
F: Support KWP2000+ software and other KWP/ ISO software

To Read to Write:
- Click read button to read out the original data
- Click write button and select the file you want to write
- Save the file to you HD, edit or forward it -Follow the instructions on screen
- switch off ignition and wait 10 seconds

Package Included:
6 pc x Connect cables
1 pc x KWP2000+ Main unit
1 pc x Driver CD

FAQ:
Q: Can this product support update
A: No, this product can not be updated

Q: Does that will affect car IMMO when I flash update remap file to the car?
A: In general, if you operate it correctly, the problem will not happen, but as for part cars, the IMMO can not be changed, so please pay much attention during operation.

Q: If I program BMW ECU with kwp2000, do I need to set my Immobilizer ( EWS) ?
A: It is a reading and writing procedure.