Specification :

Description:
BDM 100 is a universal programmer ( it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor ( essential) .
BDM 100 requires the ECU to be open, " on the bench" , as the reading/ programming operations are realized by linking a flat cable to specific area the ECU ( the tool, on the other side, is linked to the USB port of a computer) .
BDM 100 also allows to create perfect copies of the whole software of an ECU ( after having read the original ECU software) .

The software allows to read and program the WHOLE ECU content of:
29BL802 SSOP EEPROM file ( or ROM memory with maps if EEPROM physically not present) ;
MOTOROLA MPC5xx Processor file;
Serial EEPROM content.
Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved ( if the original software has been previously stored) .

Package includes:
1. BDM 100 Interface.
2. ECU connecting cable with 3 adapters.
3. USB connecting cable.
4. 12V Power Supply.

FAQ:
Q: What' s the advantage of this unit?
A: It can read the software of ECU before, even if the ECU hardware is broken, then copy the ECU inside information completely.

Q: What cars this unit can do?
A: You can check the following information, if your car meet the following car model and ECU type, that means, you can use this unit to do your car:
1. BOSCH EDC16/ EDC16+ / ME9
2. MARELLI MJET/ MJET+ Fiat/ Opel/ Suzuki
3. SIEMENS 5WS-803( A) Volvo s40v50 2.0d/ Ford
4. C.Max 2.0d/ Peugeot 2.0 Hdi FAP
5. SIEMENS 5WK MS45 BMW Z4