Free Member
PT. ANDALAN BANGUN SEJAHTERA
http://indomonster.com/andalbangunsejahtera/
\"JENCO INSTRUMENT - JEKEN Ultrasonic Cleaner - MITECH Ultrasonic thickness - DAVIS Weather Station - EUTECH Instrument - SOCOREX Liquid Handling - MEMMERT - BLUE GIZMO Instrument - HACH - OHAUS Balance - VITLAB Plasticware - DURAN Glassware - KETT
Contact Information
Name:

Mrs. Pera / Krisna / Juni [Marketing]

E-mail:
Phone Number:

Phone number of Mrs. Pera / Krisna / Juni at Jakarta Pusat

Mobile Number:

Mobile number of Mrs. Pera / Krisna / Juni at Jakarta Pusat

Fax Number:

Fax number of Mrs. Pera / Krisna / Juni at Jakarta Pusat

Address:

Jl. Sumur Batu Raya No. 1 RT 001 RW 006, Kemayoran
Jakarta Pusat 10640, Jakarta
Indonesia

Average User Review

There is no review for this company

Write a review
Language :

Sell

MEMMERT - TEMPERATURE TEST CHAMBER CTC/ TTC[Oct. 27, 2011 14:02:06]
Quantity Order:
Payment MethodTelegraphic Transfer (T/T)
OriginGermany
100% AtmoSAFE: The high flyer for climate testing ( or temperature testing) simulates according to standards the perfect atmosphere and reduces the time needed through rapid temperature changes: Medium speed at a temperature change in heating operation 10 K/ min, average speed for a temperature change in cooling operation from + 190° C to 0° C: 6 K/ min.

CTC 256
CTC climatic test chamber: Climatic testing of composite materials, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics.

high-performance air fan in working chamber
depending on operation status automatic adaption of fan speed resp. manual adjustment from 10 to 100%
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication on temperature and humidity control
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
digital display ( LED) of all set parameters, such as temperature, weekdays, time, humidity, fan speed and set-up values - language to be chosen in setup
digital display of set values ( resolution: 0, 1° C below 99, 9° C, 0, 5° C above 100° C) and actual values ( resolution: 0, 1° C) of temperature ( LED)
active control for humidifying and dehumidifying ( 10-98% rh) with digital display of relative humidity - resolution of display: 0, 5% , setting accuracy: 1%
humidity supply with distilled water from 2 tanks integrated in unit on telescopic slide with automatic change over
2 x 10 l tanks as condensate collector, on telescopic slide
long-term logging ( ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface ( incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers ( USB available via converter, see accessories)
USB interface including MEMMERT Software " Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB ( up to 40 ramps)
incl. works calibration certificate for -20 ° C and + 160 ° C
incl. works calibration certificate for + 30° C at 60% rh

high-performance ring heaters with optimised air circulation
door heating to avoid condensate

twin compressor
speed adjustable condenser fan
chlorine-free refrigerant R404A

with audible and visual alarm in case of over-/ undertemperature and underhumidity, open door and empty water tank
independently working, digitally adjustable electronic overtemperature controller TWW, protection class 3.3
additional integral over- and undertemperature protection " ASF" ( Auto-Safety-Function) automatically following the set value at a preset tolerance range
mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 ° C above max. oven temperature

w x h x d: 898 x 1730 x 1100 mm
fully insulated stainless steel door with double locking and 4-point adjustment, heated
rear zinc-plated steel
on castors

w x h x d: 640 x 670 x 597 mm, 256 l
easy-to-clean interior, made of stainless steel, material no. 1.4301 ( ASTM 304) , hermetically welded
1 stainless steel grid
3-layer-high-tech-insulation
lateral entry port, right, 80 mm diam. with silicone plug
Halogen interior lighting 2 x 25 W, switchable

with humidity control: from + 10 ° C up to + 95 ° C
without humidity control: from -42 ° C up to + 190 ° C
temperature uniformity in chamber: + / - 0.5 up to 2 K

400 V, 3 phases N, 50 Hz
ca. 7.000 W

TTC 256
TTC temperature test chamber: Temperature testing of composite materials, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics.

high-performance air fan in working chamber
depending on operation status automatic adaption of fan speed resp. manual adjustment from 10 to 100%
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication on temperature control
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
digital display ( LED) of all set parameters, such as temperature, weekdays, time, fan speed and set-up values - language to be chosen in setup
digital display of set values ( resolution: 0, 1° C below 99, 9° C, 0, 5° C above 100° C) and actual values ( resolution: 0, 1° C) of temperature ( LED)
2 x 10 l tanks as condensate collector, on telescopic slide
long-term logging ( ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface ( incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers ( USB available via converter, see accessories)
USB interface including MEMMERT Software " Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB ( up to 40 ramps)
incl. works calibration certificate for -20 ° C and + 160 ° C

high-performance ring heaters with optimised air circulation
door heating to avoid condensate

twin compressor
speed adjustable condenser fan
chlorine-free refrigerant R404A

with audible and visual alarm in case of over-/ undertemperature and open door
independently working, digitally adjustable electronic overtemperature controller TWW, protection class 3.3
additional integral over- and undertemperature protection " ASF" ( Auto-Safety-Function) automatically following the set value at a preset tolerance range
mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 ° C above max. oven temperature

w x h x d: 898 x 1730 x 1100 mm
fully insulated stainless steel door with double locking and 4-point adjustment, heated
rear zinc-plated steel
on castors

w x h x d: 640 x 670 x 597 mm, 256 l
easy-to-clean interior, made of stainless steel, material no. 1.4301 ( ASTM 304) , hermetically welded
1 stainless steel grid
3-layer-high-tech-insulation
lateral entry port, right, 80 mm diam. with silicone plug
Halogen interior lighting 2 x 25 W, switchable

from -42 ° C up to + 190 ° C
temperature uniformity in chamber: + / - 0.5 up to 2 K

400 V, 3 phases N, 50 Hz
ca. 7.000 W
You have [3] new inquiries. Go to Member Menu
Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indomonster.com. All Rights Reserved.