pH/ Temp. handheld splash proof meter, microprocessor based with LCD display of both temperature and pH. Uses Jenco 4-pin connector and 3-in-1 pH electrodes and has separate Jenco screw type ATC connector for 10K thermistor temperature probes. AC/ DC Powered, 9 volt battery.

Features

Cmos Microcomputer Design

Low Drift And High Stability

Large LCD Display Windows

Touch Key Control With Audio Feedback

User Friendly Design With Flashes And Indicators

Power Down Memories

Power Backup Direct Measurement

Electrode Offset Recognition

Electrode Slope Recognition

NBS Buffer Recognition: 4.01, 7.00 And 10.01

Built In Buffer Temperature Coefficients

Automatic Slope Calculation

Automatic Temperature Compensation

Low Cost

pH
pH auto temp compensation 0 to 99.9° C
pH buffer recognition pH 4.01, pH 7.00 and pH 10.01
pH buffer temp range 0 to 60.4 ° C
pH electrode slope recognition ± 20% at pH 4.01 and pH 10.01
pH electrode offset recognition ± 60 mV at pH 7.00
pH dual point standardization pH 7.00 and pH 4.01, pH 7.00 and pH 10.01

JENCO Portable pH Meter
Model : 6007

General
End point sensing and hold Yes
Power backup Yes
Audio feedback All touch keys
Error indication Six error codes
Display pH: 12.5 mm high LCD
Temp: 7.5 mm high LCD
Input impedance Gerater then 1012 Ohms
ATC probe Standard: Themistor
Power source one 9V battery, AC line adaptor
Dimensions 150 x 70 x 30 mm
Weight 200 gm