ICE FLAKE MACHINE

Quantity Order:

Origin:

Malaysia

Pack. & Delivery:

PALLET

1. New Dry Flake Ice kapasitas 3.5 Ton/hari
New Dry Flake Ice Machine Ice Generator Maker with complete systems
Model : SF40
Year Made : Custom Made to Order
Production Capacity : 3500 kgs ± 5% Kgs 24 Hr
(Ambient Temp 30°C Water Temp. 27°C)
Evaporating Temperature : -25°C
Refrigerant : R22 Freon
Ice Thickness : Minimum 1.8 – 2.1 mm
Capacity per Hour : 140 – 150 kgs
Dimension : 1600 x 1800 x 1200 mm (H)
Compressor Type : Bitzer (Made in Germany)
Compressor Capacity : 15 HP
Fixing Power : 12 Kw
Compressor Durations : 70% - 80% Loading Power
Voltage : 380 V / 3 Ph / 50 Hz
Flake Ice Storage : Nil
Ice Making Pump : 0.12 Kw
Ice Scrapper Gear Motor : 0.37 Kw
Cooling Capacity : 18.800 Kcal

A. Ice Generator Structure of Parts details as below:
1. 1 Set Ice –maker Freezer System and Liquid Accumulator consisting of:
Recycle Liquid Special design Re-cycle liquid system by liquid injection control (Liquid Re-cycle systems originally has reserved copyright)
Freezing Evaporator The Evaporator is finish machined by highly heat-conductive alloy, with anti rash protection.
Rotating Ice Scraper SUS 304 grade Stainless Steel Ice Scrapper Blade run by custom made, Low speed gear motor 380 V/3 Ph/50 Hz.
Ice Making Pump Centrifugal monobloc water pump c/w motor 380V/3Ph/50Hz (Internal water distribution by rotating sub rack)
Chilled Water Tank Top water distribution with high pressure joint unit, Bottom water collection recycling tank made from aluminum, water level On/Off valve control connect with PVC ball cock and start water pump.
Cylinder Protection High density PU insulation injected around internal between bin Freezer maker and Stainless Steel exterior (100 mm – 125 mm approximate only)

2. 1 Set Bitzer (Made in Germany), semi-Hermetic single stage Compressor on mounting on steel base complete with:
- Suction and discharge stop valve
- Oil separator with automatic oil recovery system
- Pressure gauge panel
- Pressure switches
- Capacity control solenoid

3. 1 Unit Air Cooled Condensing:
- Air purging valve

4. 1 Set Copper Piping and Fitting consisting of:
Piping : Standard Copper pipe according to sizing needs
Pipe Insulation : Aero foam sheet or tube clapped at our layer copper tube

5. 1 Lot Refrigerant Safety Control
High/Low pressure control, Oil Separator, Sight Glass, Hand Valve, Sight Glass Safety Valve, service valve.
Danfoss product : Danfoss EVR 10 Electrical On/Off Solenoid Valve
(Denmark Made) Danfoss KP15 Liquid High/Low Pressure Switch safety control
Danfoss MP54 Oil Differential Pressure Switch safety control
Danfoss Filter Drier with interchangeable solid core.
ALCO Expansion Valve

B. Electrical Centralize Main Switch Control Panel Specification Detail as below:
1. 1 Set 30 Amps Electrical Main Circuit Breaker
Starter Circuit breaker set as below:
- 15.0 HP Starter for compressor motor branch circuit breaker
- 1 HP Starter for Condensing motor
- 1/8 HP Starter for Centrifugal Ice making pump motor
- ½ HP Starter for Ice Scrapper motor
- ¼ HP Starter for cooling fan
2. 1 Set Quality Pilot Indication Lamps
- For every main control active, will indication on surface electrical control board

3. 1 Set Accessories Parts
- Voltage monitor relay
- Compressor Overload Protection Relay unit
- Main Starting On/Off starter switches
- Electrical branch connation connector set.

2. New Dry Flake Ice kapasitas 5 Ton/hari
New Dry Flake Ice Machine Ice Generator Maker with complete systems
Model : SF60
Year Made : Custom Made to Order
Production Capacity : 5500 kgs ± 5% Kgs 24 Hr
(Ambient Temp 30°C Water Temp. 27°C)
Evaporating Temperature : -25°C
Refrigerant : R22 Freon
Ice Thickness : Minimum 1.8 – 2.1 mm
Capacity per Hour : 200 – 230 kgs
Dimension : 1400 x 1850 x 1500 mm (H)
Compressor Type : Bitzer (Made in Germany)
Compressor Capacity : 30 HP
Fixing Power : 22 Kw
Compressor Durations : 70% - 80% Loading Power
Voltage : 380 V / 3 Ph / 50 Hz
Cooling Tower : RT 25
Flake Ice Storage : Nil
Ice Making Pump : 0.25 Kw
Ice Scrapper Gear Motor : 0.55 Kw
Cooling Capacity : 28.200 Kcal
Condenser Water Pump : 2� x 1.5 HP 380 V / 3 Ph / 50 Hz

A. Ice Generator Structure of Parts details as below:
1. 1 Set Ice –maker Freezer System and Liquid Accumulator consisting of:
Recycle Liquid Special design Re-cycle liquid system by liquid injection control (Liquid Re-cycle systems originally has reserved copyright)
Freezing Evaporator The Evaporator is finish machined by highly heat-conductive alloy, with anti rash protection.
Rotating Ice Scraper SUS 304 grade Stainless Steel Ice Scrapper Blade run by custom made, Low speed gear motor 380 V/3 Ph/50 Hz.
Ice Making Pump Centrifugal monobloc water pump c/w motor 380V/3Ph/50Hz (Internal water distribution by rotating sub rack)
Chilled Water Tank Top water distribution with high pressure joint unit, Bottom water collection recycling tank made from aluminum, water level On/Off valve control connect with PVC ball cock and start water pump.
Cylinder Protection High density PU insulation injected around internal between bin Freezer maker and Stainless Steel exterior (100 mm – 125 mm approximate only)
2. 1 Set Bitzer (Made in Germany), semi-Hermetic single stage Compressor on mounting on steel base complete with:
- Suction and discharge stop valve
- Oil separator with automatic oil recovery system
- Pressure gauge panel
- Pressure switches
- Capacity control solenoid

3. 1 Unit Shell & Tube water condenser, complete with:
- Dual Safety valve
- Air purging valve

4. 1 Set Copper Piping and Fitting consisting of:
Piping : Standard Copper pipe
Pipe Insulation : Aero foam sheet or tube clapped at our layer copper tube

5. 1 Set 25 RT Cooling Tower & Condenser Water pump Centrifugal monobloc pump type or equivalent
Fan Motor 1.0 HP motor c/w fan blades & grads
Condenser Pump 1.5 HP motor water pump c/w 2� Piping and Hand Valve

6. 1 Lot Refrigerant Safety Control
High/Low pressure control, Oil Separator, Sight Glass, Hand Valve, Sight Glass Safety Valve, service valve.
Danfoss product : Danfoss EVR 15 Electrical On/Off Solenoid Valve
(Denmark Made) Danfoss KP15 Liquid High/Low Pressure Switch safety control
Danfoss MP54 Oil Differential Pressure Switch safety control
Danfoss Filter Drier with interchangeable solid core.
ALCO Expansion Valve

B. Electrical Centralize Main Switch Control Panel Specification Detail as below:
1. 1 Set 60 Amps Electrical Main Circuit Breaker
Starter Circuit breaker set as below:
- 25.0 HP Starter for compressor motor branch circuit breaker
- 1.5 HP Starter for Condenser water pump motor
- 1.0 HP Starter for Cooling Tower Fan Motor
- 1/3 HP Starter for Centrifugal water pump motor
- ¾ HP Starter for Ice Scrapper motor

2. 1 Set Quality Pilot Indication Lamps
- For every main control active, will indication on surface electrical control board

3. 1 Set Accessories Parts
- Voltage monitor relay
- Compressor Overload Protection Relay unit
- Main Starting On/Off starter switches
- Electrical branch connation connector set.
Please don’t hesitate to ask for quotation from us.
Alpha Technics
Medan – Sumatera Utara – Indonesia
Ph. : +6261-4560645-30202947-77861787
Fax. : +6261-4560645
Cell : +62819899817
Email : alphatechnics17@yahoo.com
Website : www.alphatechnic17.com

Recommend to your friends