Specification :

1. Tube Ice Capacity 5 Ton/ day
New Tube Ice Maker
Model : STR 5T
Year Made : Custom Made to Order
Origin : Taiwan
Production Capacity : 5000 kgs ± 5% Kgs 24 Hr
Refrigerant : R22 Freon
Size of Ice Tube Approx : Ø 29 mm
Dimension : 520 ( L) x 820 ( W) x 2120 mm ( H)
Compressor Type : Bitzer ( Made in Germany)
Compressor Capacity : 19 KW
Capacity ( Kcal/ Hr) : 28.638
Total Output : 25-30 Amps
Compressor Duration : 70 – 80% Loading Power
Voltage : 380 V / 3 Ph / 50 Hz
Condensor : Water Cooled Condensor / Air Cooled Condensor
Cooling Tower : RT 15
Water Pump : 38 mm x 10 HP 380 V / 3 Phase / 50 Hz
1 Set SFR 5 T Tube Ice Maker Freon Surge Drum system, producing ice of approximated diameter Ø 29 mm 5000 kg ± 5% per 24 hrs

A. Ice Generator Structure of Parts details as below:
1. 1 Set Ice Maker Freezer System and Liquid Accumulator consisting of:
Freezing Tube SUS 304 non-Joint Stainless Steel tubing ( made in Japan) Top and Bottom part was welded with Quality Joining
Rotating Driver Ice Cutter SUS 304 grad Stainless Steel Ice Cutter Blade run by medium speed gear motor 380 V/ 3p/ 50 Hz.
Calculation Water Pump Centrifugal monobloc water pump c/ w motor 380V/ 3P/ 50 Hz
Water Tank Top water distribution and Bottom water collection tank made from stainless steel complete with water level On/ Off valve connect with pvc ball cock
Cylinder Protection Agro foam sheet around the surface tank freezer maker

2. 1 Set Bitzer ( Made in Germany) , semi-Hermetic single stage Compressor on mounting on steel base complete with:
- Suction and discharge stop valve
- Oil separator with automatic oil recovery system
- Pressure gauge panel
- Pressure switches
- Capacity control solenoid

3. 1 Unit Liquid Receiver Tank complete with:
- Sight glass
- Sight glass valve
- Dual safety valve
- Drain Valve

4. 1 Set Shell & Tube Water cooled condenser, complete with:
- Dual Safety Valve
- Air Purging valve

5. 1 Set Copper Piping and Fitting consisting of:
Pipe : Non-bending join system
Pipe Insulation : Aero foam sheet clapped with PVC tape

6. 1 Set 15 RT Cooling Tower or Equivalent
Fan Motor ¼ HP motor c/ w fan blades & grads

7. 1 Set Condenser Water Pump centrifugal monobloc pump type
: 1 HP motor c/ w 4� PVC Piping and Hand Valve

8. 1 Lot Refrigerant Safety Control
High / Low pressure switch, oil pressure switch, Oil separator, Filter Drier, Solenoid Valve, Sight glass, Hand valve, High pressure gauge, Low pressure gauge, Oil pressure gauge, Liquid Regulator ( Danfoss or Saginomiya)
Safety Valve
Liquid Level Indication

9. 1 Set 40 Amps Electrical Main circuit breaker
Starter Circuit breaker set as below:
- 25 HP Starter for compressor motor branch circuit breaker
- 1 HP Starter for condenser water pump motor
- ¼ HP Starter for cooling Tower Fan Motor
- 1 HP Starter for centrifugal water pump motor
- 1.5 HP Starter for Ice Cutter pump motor

10. 1 Set Quality Pilot Indication Lamps:
- For every main control active will indication on surface electrical

11. 1 Set Accessories Parts:
- On/ Off starter switches
- Digital Timer control for Ice Freezing and defrosting action
- Electrical connation connector set
- Voltage monitor relay