Welcome to
ALAT LABORATORIUM PU BINA MARGA ( KEBINAMARGAAN)

Free Member
ALAT LABORATORIUM PU BINA MARGA ( KEBINAMARGAAN)
ALAT LABORATORIUM PU BINA MARGA ( KEBINAMARGAAN)
Indonesia
Share
Welcome to
ALAT LABORATORIUM PU BINA MARGA ( KEBINAMARGAAN)

http://indomonster.com/alatlabbinamarga


Alat Laboratorium PU Bina Marga ( Kebinamargaan) according standard Astm and Aashto or SNI. for information and purchases please contact us : 0852.1765.7700 ( Customer service) , 0812.2073.8885 ( Line marketing)
Email : alatlab_binamarga@ yahoo.co.id
Showroom & Workshope : Jl. Raya Cipeundeuy No. 777 Bandung Barat 40552 Bandung, Indonesia 40552, Jawa Barat â Indonesia.

ALAT LABORATORIUM UJI TANAH ( Mekanika Tanah/ Mektan) :
 ª HAND BOR, SO-110A
 ª STANDARD PENETRATION TEST ( SO-130A) , Astm D-1586/ Aashto T-206
 ª SAMPLE EXTRUDER ( SO-140)
 ª SAMPLE EXTRUDER Electric ( SO-145)
 ª DYNAMIC CONE PENETROMETER/ DCP ( SO-150)
 ª TUBE DENSITY SAMPLER, Astm D-2573 ( SO-160)
 ª CORPS OF ENGINEER SOIL SURFACE SAMPLER Astm D-2937, ( SO-170)
 ª DYNAMIC CONE PENETROMETER/ DCPT ( SO-150LR)
 ª DUTCH CONE PENETROMETER/ Sondir 2.5 Ton ( SO-200) Astm D-3441
 ª DUTCH CONE PENETROMETER/ Sondir 5 Ton ( SO-210) Astm D-3441
 ª HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton ( SO-200HD) , Astm D-3441
 ª HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton ( SO-210HD) Astm D-3441
 ª HYDRAULIC CONE PENETROMETER/ Sondir Hydraulic 10 Ton ( SO-700HD) Astm D-3441
 ª PLATE BEARING TEST SET ( SO-250) Astm D-1194/ Aashto T-235
 ª FIELD CBR TEST SET ( SO-260) Astm D-4429
 ª PROVING RING PENETROMETER ( SO-270)
 ª TVA PENETROMETER ( SO-280)
 ª ATTERBERGH LIMIT ( SO-310, SO-315, SO-320)
 ª LIQUID LIMIT TEST SET ( SO-310) Astm D-4318/ Aashto T-89
 ª LIQUID LIMIT DEVICE Hand Operated ( SO-311A) , Astm D-4318/ Aashto T-89
 ª LIQUID LIMIT DEVICE ELECTRIC ( SO-311B) , Astm D-4318/ Aashto T-89
 ª PLASTIC LIMIT TEST SET ( SO-315) , Astm D-4318/ Aashto T-90
 ª SHRINKAGE LIMIT TEST SET ( SO-320) , Astm D-427/ Aashto T-92
 ª HYDROMETER ANALYSIS TEST SET ( SO-330A) , Astm D-422/ Aashto T-88
 ª MECHANICAL END OVER END SHAKER ( SO-338) , BS-1377
 ª VACUUM STAND With 6 Flask Capacity ( SO-339A)
 ª SPECIFIC GRAVITY Heating Method ( SO-340)
 ª SPECIFIC GRAVITY Vacuum Method ( SO-340A) , Astm D-854/ Aashto T-100
 ª SPECIFIC GRAVITY Vacuum Method ( SO-340B) , Astm D-854/ Aashto T-100
 ª COMPACTION TEST SET ( SO-350) , Astm D-698/ D-1557/ T-99/ T-180
 ª LABORATORY CBR TEST SET Electric ( SO-360A) , Astm D-1883/ Aashto T-193
 ª LABORATORY CBR TEST SET, Astm D-1883/ Aashto T-193
 ª COMBINATION PERMEAMETER ( SO-370) , Astm D-2434/ AASHTO T-215
 ª COMPACTION PERMEAMETER TEST SET ( SO-390A) , 1/ 30 cu.ft
 ª COMPACTION PERMEAMETER TEST SET ( SO-395A) , 1/ 13.33 cu.ft
 ª SAND CONE TEST SET ( SO-400) , Astm D-1556/ Aashto T-191
 ª SPEEDY MOISTURE TESTER ( SO-430) , Aashto T-217
 ª MOISTURE CONTENT TEST SET ( SO-450)
 ª SPEEDY MOISTURE TESTER ( SO-430D) , Aashto T-217
 ª UNCONFINED COMPRESSION MACHINE ( SO-500) Astm D-2166/ Aashto T-208
 ª UNCONFINED COMPRESSION MACHINE ELECTRIC ( SO-500A) , Astm D-2166/ Aashto T-208
 ª CONSOLIDATION TEST SET ( SO-515) , Astm D-2435/ Aashto T-216
 ª DIRECT SHEAR TEST SET ( SO-525) , Astm D-3080/ Aashto T-236
 ª ELECTRIC DIRECT SHEAR TEST SET ( SO-525) , Astm D-3080/ Aashto T-236
 ª TRIAXIAL TEST SET ( SO-600) CU, UU, CD test methode, Astm D-2850, Digital reading for PP value
 ª TRIAXIAL TEST SET ( SO-550) CU, UU, CD test methode Astm D-2850, Mercury manometer reading for PP value

ALAT LABORATORIUM UJI AGGREGATE ( Bahan Material) :
 ª SAMPLE SPLITER AG-100, 1/ 2 inch, 12 holes, 1/ 2 inch chute width
 ª SAMPLE SPLITER AG-101, 3/ 4 inch, 12 holes, 3/ 4 inch chute width
 ª SAMPLE SPLITER 1 inch, 12 holes, 1 inch chute width ( AG-102)
 ª SAMPLE SPLITER 1-1/ 2 inch, 12 holes, 1-1/ 2 inch chute width ( AG-103)
 ª SAMPLE SPLITER 2 inch, 12 holes, 2 inch chute width ( AG-104)
 ª SAMPLE SPLITER 2 1/ 2 inch, 12 holes, 2 1/ 2 inch chute width ( AG-105)
 ª SAMPLE SPLITER 3 " inch, 12 holes, 3 inch chute width ( AG-106)
 ª GILSON SAMPLE SPLITTER Varieble chute width, 1/ 2 " increment ( AG-111)
 ª PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 32 holes ( AG-122)
 ª PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 16 holes ( AG-123)
 ª STANDAR SIEVE, Brass Round Sieve 8 " ( 200 cm) diameter
 ª LENGTH GAUGE ( AG-170) , BS-812
 ª THICKNESS GAUGE ( AG-180) , BS-812
 ª STANDAR SIEVE Brass Round Sieve 12 " ( 200 cm) diameter - Gradation test &  ª Distribution test
 ª SIEVE 4 " ; mesh 101.6 mm opening, 8 " dia ( AG-200A)
 ª SIEVE 3 1/ 2 " ; mesh 88.9 mm opening, 8 inch dia ( AG-201A)
 ª SIEVE 3 " ; mesh 76.2 mm opening, 8 " dia ( AG-202A)
 ª SIEVE 2 1/ 2 " ; mesh 62.5 mm opening, 8 inch dia ( AG-203A)
 ª SIEVE 2 " ; mesh 50.8 mm opening, 8 " dia ( AG-204A)
 ª SIEVE 1 3/ 4 " ; mesh 44.4 mm opening, 8 inch dia ( AG-205A)
 ª SIEVE 1 1/ 2 " ; mesh 38.1 mm opening, 8 " dia ( AG-206A0
 ª SIEVE 1 1/ 4 " ; mesh 31.7 mm opening, 8 inch dia ( AG-207A)
 ª SIEVE 1 " ; mesh 25.4 mm opening, 8 " dia ( AG-208A)
 ª SIEVE 7/ 8 " ; mesh 22.2 mm opening, 8 inch dia ( AG-209A)
 ª SIEVE 3/ 4 " ; mesh 19.0 mm opening, 8 " dia ( AG-210A)
 ª SIEVE 5/ 8 " ; mesh 15.8 mm opening, 8 inch dia ( AG-211A)
 ª SIEVE 1/ 2 " ; mesh 12.7 mm opening, 8 " dia ( AG-212A)
 ª SIEVE 7/ 16 " ; mesh 11.1 mm opening, 8 inch dia ( AG-213A)
 ª SIEVE 3/ 8 " ; mesh 9.5 mm opening, 8 " dia ( AG-214A)
 ª SIEVE 5/ 16 " ; mesh 7.9 mm opening, 8 inch dia ( AG-215A)
 ª SIEVE 1/ 4 " ; mesh 6.3 mm opening, 8 " dia ( AG-216A)
 ª SIEVE # 4; mesh 4.75 mm opening, 8 inch dia ( AG-218A)
 ª SIEVE # 8; mesh 2.36 mm opening, 8 " dia ( AG-222A)
 ª SIEVE # 10; mesh 2.00 mm opening, 8 inch dia ( AG-223A)
 ª SIEVE # 12; mesh 1.70 mm opening, 8 " dia ( AG-224A)
 ª SIEVE # 16; mesh 1.18 mm opening, 8 inch dia ( AG-226A)
 ª SIEVE # 20; mesh 0.850 mm opening, 8 " dia ( AG-228A)
 ª SIEVE # 30; mesh 0.600 mm opening, 8 inch dia ( AG-230A)
 ª SIEVE # 40; mesh 0.425 mm opening, 8 " dia ( AG-232A)
 ª SIEVE # 50; mesh 0.300 mm opening, 8 inch dia ( AG-234A)
 ª SIEVE # 60; mesh 0.250 mm opening, 8 " dia ( AG-235A)
 ª SIEVE # 70; mesh 0.212 mm opening, 8 inch dia ( AG-236A)
 ª SIEVE # 80; mesh 0.180 mm opening, 8 " dia ( AG-237A)
 ª SIEVE # 100; mesh 0.150 mm opening, 8 inch dia ( AG-238A)
 ª SIEVE # 120; mesh 0.125 mm opening, 8 " dia ( AG-240A)
 ª SIEVE # 140; mesh 0.106 mm opening, 8 inch dia ( AG-240A)
 ª SIEVE # 170; mesh 0.090 mm opening, 8 " dia ( AG-242A)
 ª SIEVE # 200; mesh 0.075 mm opening, 8 inch dia ( AG-242A)
 ª PAN & COVER; receiver with lid, 8 inch dia ( AG-250)
 ª STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch diameter
 ª Sieve Analysis, Gradation Test, AG 300A up to AG 350
 ª SIEVE SHAKER ( AG-510) , Hand Operated
 ª SIEVE SHAKER Electric ( AG-515)
 ª ELECTRIC SIEVE SHAKER With Timer ( AG-515T)
 ª WOODEN STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch dia)
 ª WOODEN SIEVE 1/ 4 Inch up to 4 Inch ( mesh 6.3 mm up to mesh 101.6 mm opening)
 ª WOODEN SIEVE # 4; Mesh 4.75 mm opening
 ª WET WASHING SIEVE # 200, 8 " dia., 4 " depth ( AG-492)
 ª WET WASHING SIEVE # 200, 8 " dia., 8 " depth ( AG-493)
 ª SAND EQUIVALENT TEST SET ( AG-600) ASTM D-2419
 ª SAND EQUIVALENT SHAKER ( AG-610) Astm D-2419/ Aashto T-176
 ª BOTTLE ROLLER BS-812/ ASTM C-117 ( AG-621)
 ª LOS ANGELES ABRASION MACHINE, ASTM C-131/ AASHTO T-96 ( AG-700)
 ª AGGREGATE IMPACT TEST, BS-812 ( AG-750)
 ª AGGREGATE CRUSHING VALUE APPARATUS, BS-812 ( AG-760)
 ª AGGREGATE CRUSHING VALUE APPARATUS ( AG-760A)
 ª BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 ( AG-800)
 ª ABSORPTION OF FINE AGGREGATE TEST SET, ASTM C-128/ AASHTO T-84 ( AG-810A)
 ª SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE
 ª TEST SET, Mechanical Balance, ASTM C-127/ AASHTO T-85 ( AG-825)
 ª SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, ASTM C-127/ AASHTO T-85 ( AG-825)
 ª ORGANIC IMPURITIES TEST SET, ASTM C-40/ AASHTO T-21 ( AG-910)
 ª SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 ( AG-920)

ALAT LABORATORIUM UJI BETON ( Lab. Uji Beton/ Bahan/ Bangunan) :
 ª AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE ( CE-100) , Astm C-204/ Aashto T-153
 ª SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST ( CE-110) , Astm C-188/ Aashto T-133
 ª TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE ( CE-120) , Astm C-187/ C-191/ T-129/ T-131
 ª COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR ( CE-160) , Astm C-109/ Aashto T-106
 ª COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, ASTM C-109/ AASHTO T-106 ( CE-160A)
 ª COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-170)
 ª COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-175)
 ª CONCRETE CYLINDER MOLD ( CO-300) , Cetakan Silinder Beton 10 cm dia x 20 cm height
 ª CONCRETE CYLINDER MOLD ( CO-301) , Silinder Beton 15 cm dia x 30 cm height
 ª CONCRETE CUBE MOLD ( CO-311) , Cetakan Kubus Beton 10 x 10 x 10 cm
 ª CONCRETE CUBE MOLD ( CO-312) , Kubus Beton 15 x 15 x 15 cm
 ª CONCRETE BEAM MOLD ( CO-317A) , 15x15x60 cm Uji lentur beton
 ª CONCRETE BEAM MOLD ( CO-319A) , 20x20x80 cm Uji lentur beton
 ª COMPRESSION MACHINE 1500 kN ( CO-321.3) , Mesin Press Beton Hydraulic Hand Pump Astm C-39
 ª COMPRESSION MACHINE 2000 kN ( CO-321.4) , Press Beton Hydraulic Hand Pump Astm C-39
 ª COMPRESSION MACHINE 3000 kN ( CO-321.5) , Mesin Press Beton Hydraulic Hand Pump Astm C-39
 ª COMPRESSION MACHINE 1500 kN ( CO-325.3) , Mesin Test Beton Electric Hydraulic Pump ASTM C-39
 ª COMPRESSION MACHINE 2000 kN ( CO-325.4) , Test Beton Electric Hydraulic Pump Astm C-39
 ª COMPRESSION MACHINE 3000 kN ( CO-325.5) , Test Beton Electric Hydraulic Pump Astm C-39
 ª COMPRESSION MACHINE 2000 kN ( CO-325.4SA)
 ª COMPRESSION MACHINE 2000 kN ( CO-325.4DA)
 ª HYDRAULIC CONCRETE BEAM TESTING MACHINE ( CO-330) , Astm C-78
 ª MECHANICAL CONCRETE BEAM TESTING MACHINE ( CO-351) , Astm C-78
 ª CONCRETE COMPRESSION MACHINE 2000 kN ( CO-325.4SA)
 ª CONCRETE COMPRESSION MACHINE 2000 kN ( CO-325.4DA)
 ª COMPACTING FACTOR APPARATUS ( CO-355) , BS-1881
 ª SLUMP TEST SET ( CO-370) , Astm C-143/ Aashto T-119
 ª VEBE TIME ( CO-380) , BS-1881
 ª AIR CONTENT OF FRESH MIXED CONCRETE ( CO-400) , Astm C-231/ Aashto T-152
 ª VIBRATING TABLE ( CO-410)
 ª VERTICAL CYLINDER CAPPING SET ( CO-470) , Astm C-617
 ª MODULUS OF ELASTICITY IN CONCRETE TEST SET ( CO-500)
 ª SPLIT TENSILE TEST CO-525, BS-1881
 ª CONCRETE TEST HAMMER Astm C-805 Proceq/ Original Schmidt ® , Matest, Tecnotest, elcometer.
 ª CALIBRATION ANVIL, ASTM C-805 ( CO-555)
 ª CONCRETE TEST HAMMER Type N ( CO-550.1S)
 ª CONCRETE TEST HAMMER Type L ( CO-550.2S)
 ª CONCRETE TEST HAMMER Type NR ( CO-550.3S)
 ª CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.3S)
 ª CONCRETE TEST HAMMER Pcn
 ª DIGITAL CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.5S)
 ª SILVER SCHMIDT Type UN, BN / Proceq Concrete Test Hammer
 ª CALIBRATION ANVIL, ASTM C-805 ( CO-555)
 ª CONCRETE CRACK DETECTION ( CO-325UI) â Ultrasonic Instrumentâ Concrete determination for Cavities, crack, defects due to fire and frost
 ª REBARS LOCATOR ( CO-570S) , Rebar Detection System
 ª PROFOSCOPE Rebars Detectors, Rebar detection, Measurement of Concrete cover
 ª PULL-OFF TESTER 6 or 16 kN with digital manometer ( CO-550.8S)
 ª PULL-OFF TESTER 6 or 16 kN with Electronic Display Device
 ª BUILDING MOISTURE METERS ( CO-5360BLD)
 ª ASPHALT/ CONCRETE CUTTER ( CO-400DCC)
 ª CONCRETE VIBRATOR ( CO-20EY)
 ª LABORATORY CONCRETE MIXER ( CO-610)

ALAT LABORATORIUM UJI ASPAL ( Lab. Uji Aspal/ Jalan Raya/ Transportasi) :
 ª SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS ( BI-100) , Astm D-70/ Aashto T-228
 ª DISTILATION OF CUTBACK ASPHALTS ( BI-110) , Astm D-402/ Aashto T-78
 ª WATER CONTENT IN PETROLEUM PRODUCTS ( BI-120) , Astm D-95/ Aashto T-55
 ª SAYBOLT VISCOSIMETER ( BI-150A) , Astm D-402/ Aashto T-78
 ª ASTM THERMOMETER 17 C, 19 to 27 deg.C ( GE-644.1)
 ª ASTM THERMOMETER 18 C, 34 to 42 deg.C ( GE-644.2)
 ª ASTM THERMOMETER 19 C, 49 to 57 deg.C ( GE-644.3)
 ª ASTM THERMOMETER 20 C, 57 to 65 deg.C ( GE-644.4)
 ª ASTM THERMOMETER 21 C, 79 to 87 deg.C ( GE-644.5)
 ª ASTM THERMOMETER 22 C, 95 to 103 deg.C ( GE-644.6)
 ª DIGITAL ASPHALT THERMOMETER ( GE-914TM)
 ª INFRARED THERMOMETERGE ( 380ST)
 ª FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200) , Astm D-92/ Aashto T-48
 ª FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200 A) , Astm D-92/ Aashto T-48
 ª SOFTENING POINT TEST SET ( BI-210) , Astm D-36/ Aashto T-53
 ª LOSS ON HEATING / THIN-FILM TEST ( BI-220) , Astm D-6/ D-1754, Aashto T-47/ T-179
 ª LABORATORY PENETRATION TEST SET ( BI-230) , Astm D-5/ Aashto T-49
 ª LABORATORY PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
 ª AUTOMATIC BITUMINOUS COMPACTOR ( BI-325AAC) , ASTM D-5581, BS 598-107, EN 12697-30
 ª DUCTILITY OF BITUMINOUS MATERIALS TEST SET ( BI-250) , Astm D-113/ Aashto T-51
 ª PARTICLE CHARGE METER ( BI-260)
 ª CENTRIFUGE EXTRACTOR TEST SET ( BI-300) , Astm D-2172/ Aashto T-164
 ª CENTRIFUGE EXTRACTOR TEST SET ( BI-300A) , Astm D-2172/ Aashto T-164
 ª REFLUX EXTRACTOR TEST SET ( BI-310) , ASTM D-2172/ AASHTO T-164
 ª BITUMINOUS PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
 ª PORTABLE CORE DRILLING MACHINE ( ZIZ-CF102)
 ª MARSHALL TEST SET ( BI-320) , Astm D-1559/ Aashto T-245
 ª AUTOMATIC ASPHALT COMPACTOR ( BI-325AAC) , ASTM D-5581, BS 598-107, EN 12697-30
 ª PERCENTAGE REFUSAL DENSITY BI-325PRD, BS 598-104; EN 12697-32
 ª CORE DRILLING TEST SET ( BI-400)
 ª DIAMOND BIT ( BI-406)
 ª DIAMOND CORE BIT BI-406.4H
 ª CORE DRILLING TEST SET ( BI-400L)
 ª BENKLEMAN BEAM ( BI-450)
 ª MOT STRAIGHT EDGE ( BI-470)
 ª ASPHALT RECOVERY APPARATUS ( BI-480)
 ª AUTOMATIC BITUMINOUS COMPACTOR ( BI-325AAC) , ASTM D-5581, BS 598-107

MISCELLANEOUS :
 ª UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN Compression, Tensile, Bending and Shearing test
 ª TENSILE TESTING MACHINE, test of PVC materials ( MI-100)
 ª UNIVERSAL TESTING MACHINE 2000 kN, 1000 kN
 ª DIBBLE ( TUGAL) MI-120
 ª RAIN GAUGE ( MI-130)
 ª MORTAR MIXER 5 Kg Capacity
 ª MORTAR MIXER 10 Kg Capacity

ALAT PENDUKUNG LABORATORIUM KEBINAMARGAAN ( Alat Uji Penunjang) :
 ª PROVING RING 100 kg capacity ( GE-101.1) + Kalibrasi
 ª Proving Ring 250 lbs capacity ( GE-101.2) + Kalibrasi
 ª Proving Ring 500 lbs capacity ( GE-101.3) + Kalibrasi
 ª Proving Ring 1000 lbs capacity ( GE-101.4) + Kalibrasi
 ª Proving Ring 2.000 lbs capacity ( GE-101.5) + Kalibrasi
 ª Proving Ring 6000 lbs capacity ( GE-101.6) + Kalibrasi
 ª Proving Ring 10.000 lbs capacity ( GE-101) + Kalibrasi
 ª Dial Gauge- Indicator ( Mitutoyo, Teclock) , 0.2 in. x 0.0001 in GE-130
 ª Dial Gauge- Indicator ( Mitutoyo, Teclock) , 1.0 in x 0.01 in GE-131
 ª Dial Gauge- Indicator ( Mitutoyo, Teclock) , 10mm x 0.01mm GE-135
 ª Dial Gauge- Indicator ( Mitutoyo, Teclock) , 20mm x 0.01mm GE-136
 ª Dial Gauge Indicator ( Mitutoyo, Teclock) , 30mm x 0.01mm GE-137
 ª Dial Indicator ( Mitutoyo, Teclock) , 50 mm x 0.01 mm GE-138
 ª Magnetic Dial Holder ( GE-140)
 ª DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity ( GE-161PC)
 ª Ohaus CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity ( GE-150)
 ª Timbangan Ohaus - TRIPLE BEAM BALANCE ( Ohaus, ADAM) ,
 ª Timbangan 2610 gr cap x 0.1 sensitivity ( GE-152)
 ª Timbangan 2610 gr cap x 0.1 sensitivity ( GE-152LK)
 ª Ohaus DIAL O-GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity ( GE-153)
 ª Ohaus HEAVY DUTY SOLUTION BALANCE, Timbangan 20 kg cap x 1 sensitivity ( GE-157)
 ª PLATFORM SCALE ( Nagata, Precisa, AND) , 50 kg cap x 10 gr sensitivity GE-159
 ª HEAVY DUTY SOLUTION BALANCE ( GE-157LK) , 20 kg cap x 1 sens
 ª DIGITAL BALANCE ( AND) , 310 gr cap x 0.001 gr sensitivity GE-160
 ª DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity ( GE-161)
 ª DRYING OVEN ( Memmert) 14 litre, drying type, GE-171
 ª DRYING OVEN ( Memmert) 32 litre, drying type, GE-172
 ª DRYING OVEN ( Memmert) 39 litre, drying type, GE-173
 ª OVEN ( Memmert) 53 litre, drying type, GE-174
 ª OVEN ( Memmert) 108 litre, drying type, GE-175
 ª OVEN ( Memmert) 256 litre, drying type, GE-176
 ª OVEN ( Memmert) 416 litre, drying type, GE-177
 ª OVEN ( Memmert) 749 litre, drying type, GE-178
 ª HOT PLATE ( GE-191) , Single burner plate
 ª HOT PLATE ( GE-192) , Double burner plate
 ª GLASS PLATE ( GE-396) , 10 mm thick, 30 x 30 cm
 ª WATER BATH, COOLING SYSTEM
 ª BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
GLASS CLAMP, ASBESTOS, WIRE GAUZE
 ª SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
 ª RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
 ª THIN BOX, ROUND PAN; SAMPLE CAN
 ª MIXING BOWL, 10cm - 20cm - 24cm diameter.
 ª GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
 ª GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
 ª VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
 ª BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
 ª ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
 ª VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
 ª DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
 ª SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
 ª FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
 ª DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
 ª DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter
 ª FUNNEL, plastic or glass, wide or narrow mouth.
 ª BURRETE, 10 ml, 25 ml, 50 ml, 100 ml capacity.
 ª EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia â 350 ml capacity; 17 cm dia., 500 ml capacity.
 ª MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
 ª PIPETTE, 5 ml - 10 ml capacity
 ª CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
 ª THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C. 0-360 deg.C.
 ª POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
 ª DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
 ª ASTM THERMOMETER 12 C, 20 to 102 deg.C / Specific Gravity ( GE-641)
 ª ASTM THERMOMETER 63 C, 8 to 32 deg.C ( GE-642)
 ª ASTM THERMOMETER 13 C, 155 to 170 deg.C / Loss on Heating ( GE-643)
 ª ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C / Softening Point ( GE-646.1)
 ª ASTM THERMOMETER 16 C, 30 to 200 deg.C / Softening Point ( GE-646.2)
 ª ASTM THERMOMETER 11 C, 6 to 400 deg.C / Open Flash ( GE-648)
 ª ASTM THERMOMETER 7 C, 2 to 300 deg.C / Distilation ( GE-649.1)
 ª ASTM THERMOMETER 8 C, 2 to 400 deg.C / Distilation ( GE-649.2)
 ª MANOMETER, 25 kg/ cm2 capacity, 6 " diameter ( GE-670)
 ª MANOMETER, 60 kg/ cm2 capacity, 6 " diameter ( GE-671)
 ª MANOMETER, 150 kg/ cm2 capacity, 6 " diameter ( GE-672)
 ª MANOMETER, 250 kg/ cm2 capacity, 6 " diameter ( GE-673)
 ª MANOMETER, 300 kg/ cm2 capacity, 6 " diameter ( GE-674)
 ª MANOMETER, 500 kg/ cm2 capacity, 6 " diameter ( E-675)
 ª MANOMETER, 700 kg/ cm2 capacity, 6 " diameter ( GE-676)
 ª MANOMETER, 1000 kg/ cm2 capacity, 6 " diameter ( GE-677)
 ª VACUUM MANOMETER, 4 " dia. 0-76 cm HG GE-679
 ª VACUUM PUMP, Rotary type, 1/ 2 HP GE-68
 ª HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 - Ton capacity.
 ª HYDRAULIC HAND PUMP, 10.000 psi, single acting ( GE-690)
 ª HYDRAULIC HAND PUMP, 10.000 psi, double acting ( GE-691)
 ª HYDRAULIC ELECTRIC PUMP, 10.000 psi, single acting ( GE-692)
 ª HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting ( GE-695) HYDRAULIC  ª  ª HOSE, 100 - 200 cm length, 10.000 psi ( GE-697)
 ª STOP WATCH GE-700, 60 sec sweep x 30 min
 ª STOP WATCH GE-701, 30 sec sweep x 30 min
 ª VERNIER CALIPER 6 inch ( 150 mm) range measuring ( GE-710)
 ª VERNIER CALIPER 8 inch ( 200 mm) range measuring ( GE-711)
 ª VERNIER CALIPER1 10 inch ( 250 mm) range measuring ( GE-712)
 ª VERNIER CALIPER 12 inch ( 300 mm) range measuring ( GE-713)
 ª Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
 ª Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
 ª Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
 ª Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener' s Type Trowel, Chissel,
 ª Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge.
 ª MORTAR MIXER, Bench model; 5 litre capacity.

Information and purchases please contact us : 0852.1765.7700 ( Customer service) , 0812.2073.8885 ( Line marketing)
Email : alatlab_binamarga@ yahoo.co.id
Showroom & Workshope : Jl. Raya Cipeundeuy No. 777 Bandung Barat 40552 Bandung, Indonesia 40552, Jawa Barat â Indonesia.

You may click the "Company Info", "Trade Offers" and "Contact Us" to browse and see other informations of ALAT LABORATORIUM PU BINA MARGA ( KEBINAMARGAAN)'s website.


You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indomonster.com. All Rights Reserved.