The DSE7210 is an Auto Start
Control Module and the DSE7220
is an Auto Mains ( Utility) Failure
Control Module suitable for a wide
variety of single, diesel or gas,
gen-set....

The function of the load sharing module isto proportionally share load beetween two or more generator sets while the system frequency is held constan.As an accessory to the....

Automatic and start genset, multi genset synchronization ( up to 8 genset ) multi genset load sharing ( up to 8 gensets ) both active and reactive load sharing J 1939 elecctronic....

Diesel Genset Yanmar 20KVA Silent,
Engine Yanmar 4TNE84T G1
Alternator Leroy sommer LSA 42.2S5J
380 Volt 50 Hz 3 phase
1500rpm
Panel ATS optional ready stock

The module GTR 168 is a low cost generator controller equipped with auto start/ stop functions, protections alarm and annunciation etc....monitoring and protections include : ....

Easygen 1000 Series for single unit applications.The stream lined features of the easygen 1000 turn this genset control into the ideal solution for your single unit applications....

ESD5200 Series

* Multi-Voltage Units
* Isochronous, Variable & Droop Operation
* Adjustable PID
* Idle Speed Adjustment
* Auxiliary Accessory Inputs
* Single Element Speed....

Generator Paralleling and protection Unit PPU - 2

Very flexible and compact control unit with generator synchronisation and load sharing.The PPU-2 Contains all necessary....

BAE INTELLIGENT BATTERY CHARGER Typical application : generator remote measurement station mini UPS in industrial application battery charger for automotive and nautical

The DSE 3110 can be utilised as a manual or auto start module for single generating set applications and forms part of DSE' s next generation of control modules.The module haas....

The GCP-30 Series genset control is designed to provide total control for multiple, medium to large sized applications.
A network of the compact, versatile GCP-30 controls is....

â € ¢ High test current up to 80mA yielding resolution of 0.001Â © on 2Â © range.
â € ¢ Advanced Filtering method ( based on FFT Fast Fourier Transform) reduces noise interference....

The DSE4420 is an Auto Mains ( utility) Failure Control module for single genset applicaiton. The module has been disigned to work with electronic and non-electronic applications....

The DSE 6020 is an automatic mains ( utility ) failure controle module for single genset applications and designed to work with electronic and non electronic engines providing....

The DSE810 PC configuration interface is designed for use with the DSE control and DSE power series and the DSE710 and DSE 720.it has been designed to be used in conjunction with....

The DKG 309 the comprehensive AMF unit for a single genset stand by or dual genset mutual stanby operations
In Automatic position DKG - 309 monitors mains phase voltage and....

The DSE7560 is an automatic transfer switch and mains ( utility)
control module, design to automatically synchronise multiple
DSE7510s with single or multiple mains ( utility) ....

* 12 kinds of power measurement for power control and applicable to power quality control including harmonics analysis

* One click easy to use operation helps complicated....

The DKG 117 is a microprocessor controlled synchroscope with programmable synch check in front panel mounted package
it monitors the voltage andfrequency of 2 independent power....

* The Earth resistance from 0, 05 to 1200 Ohm can be measured without the auxiliary earth spikes ( the multiple earthing system )

* True RMS
Accurate true RMS readings of AC....

APPLICATIONS :
The LSU - 113 DG is a control unit for control of prime mover in a power unit.

The LSU - 113 DG can control a power unit
* In stand-alone mode, performing....

Based on its traditional core competence EFEN offers a complete system of states of the art NH - fuse links are nationally and internationally certified for various nominal....

Efen offers four product line of vertical NH Fuse - switches that have been develoved for different purposes.
* The IN Fuse switches - vertical design available in two version....

* Microprocessor controlled high voltage insulation resistance tester with diagnostic functions

* Suitable for analyzing the insulations charateristics cable, transformers, ....

Firman Generator sets Type FDG 7800SE2 reliable quality is designed specifically for your electrical needs replacement. with a very attractive and without noise, economic and....

* Wide range measurement 500V to 5000V up to 8000 G Ohm

* Large digital display with bar graph indication and back light

* Polarization index measurement ( PI )

* Timer....

* Digital clamp meter with tear drop shaped, medium size transformer jaws specially desiged for leakage current measurement

* Frequency filter switch to eliminate the effect of....

DATAKOM SMPS series are fixed output voltage, current limited lead acid batterry chargers specially designed for permanent connection to genset starter batteries

* Dust and drip proof ( design to IEC 529 IP54 )

* In addition to the facility for precision measurement, test lead for simplified two wire measurming system also supplied as....

The DSE 7310 is a controle module for single genset applications.The module incoporates a number of advanced features to meet the most demanding on-site applications.The DSE 7310....

The DSE 5520 is an automatic mains failure control module designed to provide advanced load share functionality for diesel and gas generating sets that include non electronic and....

The DSE 501 is A start control module which has been designed to manually control the engine via a key switch on the front panel a module is used to start and stop the engine....

The SPM-D10 ( ASG 410) is a microprocessor- based synchronizer designed for use on three phase AC generators equipped with woodward or other compatible speed controls and....

The MFR 1 series a family of industrial grade protective relays that offer multiple protective feature in a single package.
using a digital processor to measure true RMS values....

The DSE720 is an automatic mains failure control module has been designed to monitor a mains supply and switch over to generator when the mains power fails.the module monitors....

The DKG 109 is comprehensive unit for a single genset standby or dual genset mutual standby operations.in automatic position, DKG - 109 monitors mains phase voltages and controls....

Easygen 300 single unit control for auto start and transfers switch operation.The easYgen 320 offers automatic engine starting, stopping, metering and protection( The easygen 350....

The DSE 7210 is control module for single genset applications the generator controller incorporates a number of advanced features to meet the most demanding on-site applications....

The DKG-155 is a low cost microprocessor controlled unit designed to manually start ans stop the genset using the key switch 0on the front panel.
the unit powers up when the run....

The Datakom model DKG - 112 is low a cost, microprocessor controlled unit designed to manually start and stop the genset using the key switch on the front panel

The Datakom model 154 is a low cost, microprocessor controlled unit designed to start and stop the genset automatically on request of an external remote start sinal .it has relay....

The DSE 704 is an auto mains failure control module that offers an excellent range of engine monitoring and protection features, The module has been designed to monitor engine....

The DSE 157 is an output relay expansion module for use with DSE control and DSE power( excluding DSE 51XX) The DSE 157 has been designed to extend a host module output....