Specification :

ÃŽ Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
ÃŽ Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
ÃŽ Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
ÃŽTechnical Parameters:
 Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
 Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
 Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
 Twist (Torsion Length): 125 x Overall Diameter.
 Working Temperature: -10 ~ +70 (PE sheath)
 Storage Temperature: -20 ~ +70 (PE sheath)
ÃŽ Product Highlights:
 Small diameter and light weight.
 The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
 Compact and flexible construction are especially suitable for indoor installations.
 Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
 LSZH jackets can be offered for indoor application for which flame retardancy is required.
 Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
 Fiber geometry are strictly monitored to ensure superior transmission performance.