STDBY overlength TDS meter

Quantity Order:

Payment Method:

Telegraphic Transfer (T/T)

1 Range: 0~ 9990ppm ( mg/ L)
2 Operating Temperature: 0~ 50° C
3 TDS meter accuracy: ± 2% F. S
4 TDS meter environment: 0 to 99° C ( 32 to 212° F)
5 TDS meter Calibration: Factory Calibrated
6 TDS meter Energy conservation
7 Operating Temperature: 0~ 50° C
8 Power source: 2× 1.5v( button cell)
9 Temperature Compensation: Automatic
10 TDS meter Easy to change the electrode
11 size: 142X 25X15mm
12 weight: 36g

OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/ OFF button once out of the water. The tester will read “ 000�
3. Immerse the tester into the water no more than 2 inches.
4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes( 10-30seconds) , press the HOLD button to view out of the water.
5.press the ON/ OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing� X10� icon, multiply the reading by 10.

Recommend to your friends